Considered a unicorn by many collectors, the HH SCOTT Stereomaster 380 is a remarkable receiver. This is a very clean, single-owner piece, complete with cabinet and the original manual. Our bench tests confirmed our suspicions that this piece was well cared-for. All values are in factory spec.
Production
1963
Condition
9/10
Orig. MSRP
$399.95
Restoration
- Full 30-point service check
- Cleaned controls, switches, and chassis
Specs
Tuning range AM/FM
Power output 85 watts per channel into 8Ω (stereo)
Frequency response 20Hz to 20kHz
Total harmonic distortion 0.03%
Damping factor 100
Input sensitivity 2.5mV (MM), 150mV (line)
Signal to noise ratio 90dB (MM), 95dB (line)
Channel separation 70dB (MM), 75dB (line)
Tube complement 1x 6BS8,2x 6BE6,2x 6HS6,1x 6AU6,1x 6AV6,1x 12AT7,1x 6KE8,5x 12AX7,3x 6U8,4x 7591
Dimensions 21"W x 6"H x 13"D
Weight 38 lbs.
The History of HH Scott
From their Maynard, Massachusetts, research facilities, audio pioneers Hermon Hosmer Scott and Chief Research Engineer, Daniel R. von Recklinghausen made their mark on the Golden Age of the High-Fidelity landscape. H.H. Scott has been a leading manufacturer of superb high fidelity components since 1946. During this...
[ Read More ]
Liner Notes
Here is a tuner /amplifier that sets new performance standards. The unbeatable sensitivity of Scott tuners and the solid power of Scott amplifiers have been combined without compromise. Every worthwhile feature is here to satisfy the most demanding audio enthusiast -silver-plated, wide-band front end -oversized output transformers -aluminum chassis for low hum and cool operation. Auto-sensor circuitry swiftly and automatically switches the mode of operation to stereo when you tune to a stereo broadcast. Front panel indicator signals you when this happens.
Packing
Prepare to be impressed. We have arguably the best packing process around. This piece will ship double-boxed, and fully insulated, taking extra care to ensure there's no pressure against the face. First, the component is first wrapped in 8mil plastic. Then, the unit is strapped to a plate inside an inner box to prevent shifting, and padded on all sides. We then suspend the inner box inside a double-walled outer box using shock-resistant foam corners. We also take great care to protect the tubes. When sensible, we will pack the tubes to prevent any movement. Other times, we'll individually wrap the tubes and mark their corresponding socket to preserve the bias. You can be confident that your piece will be snug as a bug in a rug.
Shipping
This piece ships to the contiguous United States for a flat rate of $150, which includes our packaging and our insurance. Of course, we'll ship anywhere in the world, just drop us a line and we'll give you an estimate – even if you're just curious.
Stock No.
7744926875869