We are very pleased to present this pair of Eico HF20 monoblocks. The Eico tube amps have quite a following, and several people have mentioned this model to us, so we set out to find a pair. The first of the two has quite a low serial number. They've acquired a few character marks over the years, but are sonically superb. Don't miss your chance to own such a rare and legendary set.
- Production
- 1955-64
- Condition
- 8/10
- Serial No.
- 391 / 13086
- Orig. MSRP
- $799.95
- Restoration
- Full 30-point service check
- Cleaned controls, switches, and chassis
- Specs
Power output 20 watts into 8Ω (mono)
Frequency response 13Hz to 35kHz
Total harmonic distortion 1%
Tube complement 2 x ECC83, 2 x ECC82, 2 x 6L6GB, 1 x 5U4GB
Dimensions 15"W x 10"H x 8.5"D
Weight 24 lbs.
- Documentation
Eico HF20 Owner's Manual
Eico HF20 Schematic
- The History of Eico
- In the late 1960s, EICO introduced a line of solid state electronics audio equipment referred to as Cortina, but by the mid-1970s the only audio products they sold were kits manufactured for them in South Korea. EICO left the audio market in the late 1970s and the electronics market some time later. EICO existed as a...
[ Read More ]
- Liner Notes
The EICO Model 20 Is the result of a program aimed at bringing together, in one integrated unit, the finest pre-amplifier control, and power amplifier circuitry in a single chassis. The Model 20 consists of a high quality preamp-equalizer and control section plus a 20 watt Ultra-Linear Williamson-type power amplifier.
- Packing
- Prepare to be impressed. We have arguably the best packing process around. This piece will ship double-boxed, and fully insulated, taking extra care to ensure there's no pressure against the face. First, the component is first wrapped in 8mil plastic. Then, the unit is strapped to a plate inside an inner box to prevent shifting, and padded on all sides. We then suspend the inner box inside a double-walled outer box using shock-resistant foam corners. We also take great care to protect the tubes. When sensible, we will pack the tubes to prevent any movement. Other times, we'll individually wrap the tubes and mark their corresponding socket to preserve the bias. You can be confident that your piece will be snug as a bug in a rug.
- Shipping
- This piece ships to the contiguous United States for a flat rate of $150, which includes our packaging and our insurance. Of course, we'll ship anywhere in the world, just drop us a line and we'll give you an estimate – even if you're just curious.
- Stock No.
- 7610821083357
We are very pleased to present this pair of Eico HF20 monoblocks. The Eico tube amps have quite a following, and several people have mentioned this model to us, so we set out to find a pair. The first of the two has quite a low serial number. They've acquired a few character marks over the years, but are sonically superb. Don't miss your chance to own such a rare and legendary set.
Production
1955-64
Condition
8/10
Serial No.
391 / 13086
Orig. MSRP
$799.95
Restoration
- Full 30-point service check
- Cleaned controls, switches, and chassis
Specs
Power output 20 watts into 8Ω (mono)
Frequency response 13Hz to 35kHz
Total harmonic distortion 1%
Tube complement 2 x ECC83, 2 x ECC82, 2 x 6L6GB, 1 x 5U4GB
Dimensions 15"W x 10"H x 8.5"D
Weight 24 lbs.
Documentation
Eico HF20 Owner's Manual
Eico HF20 Schematic
The History of Eico
In the late 1960s, EICO introduced a line of solid state electronics audio equipment referred to as Cortina, but by the mid-1970s the only audio products they sold were kits manufactured for them in South Korea. EICO left the audio market in the late 1970s and the electronics market some time later. EICO existed as a...
[ Read More ]
Liner Notes
The EICO Model 20 Is the result of a program aimed at bringing together, in one integrated unit, the finest pre-amplifier control, and power amplifier circuitry in a single chassis. The Model 20 consists of a high quality preamp-equalizer and control section plus a 20 watt Ultra-Linear Williamson-type power amplifier.
Packing
Prepare to be impressed. We have arguably the best packing process around. This piece will ship double-boxed, and fully insulated, taking extra care to ensure there's no pressure against the face. First, the component is first wrapped in 8mil plastic. Then, the unit is strapped to a plate inside an inner box to prevent shifting, and padded on all sides. We then suspend the inner box inside a double-walled outer box using shock-resistant foam corners. We also take great care to protect the tubes. When sensible, we will pack the tubes to prevent any movement. Other times, we'll individually wrap the tubes and mark their corresponding socket to preserve the bias. You can be confident that your piece will be snug as a bug in a rug.
Shipping
This piece ships to the contiguous United States for a flat rate of $150, which includes our packaging and our insurance. Of course, we'll ship anywhere in the world, just drop us a line and we'll give you an estimate – even if you're just curious.
Stock No.
7610821083357
