Aural Fetish https://auralfetish.com/pages/product-feed Aural Audio // Product Feeds // All The Gear Tue, 13 Jul 2021 12:58:01 -0600 en 6900802617512 899.00 USD Acoustic Research Au // Integrated Amplifier Acoustic Research A-AU This is a super rare and fantastic AR amplifier that has been almost completely recapped. It's such a sweet looking and sounding amp. Production 1968-1971 Condition 9/10 Serial No. AU18104 Restoration Full service check Cleaned controls, switches, and chassis Repainted chassis cover Almost all of the caps and resistors replaced Detailed Specs Power output 50 watts per channel into 8Ω (stereo) Frequency response 20Hz to 20kHz Total harmonic distortion 0.25% Damping factor 40 Input sensitivity 2mV (MM), 200mV (line) Signal to noise ratio 57dB (MM), 75dB (line) Documentation Acoustic Research AU Owner's Manual Liner Notes The amplifier circuitry used in the Acoustic Research amplifier receiver will provide any speaker system with an accurate and powerful signal. https://auralfetish.com/products/acoustic-research-au-integrated-amplifier https://cdn.shopify.com/s/files/1/0478/4884/9576/products/ARAU-StereoIntegratedAmplifier-1_grande.jpg?v=1626203363 refurbished in stock Power output 50 watts per channel into 8Ω (stereo) Frequency response 20Hz to 20kHz Total harmonic distortion 0.25% Damping factor 40 Input sensitivity 2mV (MM), 200mV (line) Signal to noise ratio 57dB (MM), 75dB (line)
  • Full service check
  • Cleaned controls, switches, and chassis
  • Repainted chassis cover
  • Almost all of the caps and resistors replaced
  • Detailed
US LTL Freight 5381 Vintage Electronics > Audio > Audio Components > Amplifier
6568316403880 299.99 USD Akai At-2400 // Stereo Tuner Akai AKAI-AT-2400 Sleek, clean lines give this vintage Akai tuner timeless good looks. Tested, serviced and ready to rock. PRODUCTION 1976-79 CONDITION 9/10 SERIAL NO. 50239 RESTORATION Full service check Cleaned controls and switches SPECS TypeMono/Stereo Tuner Tuning BandsFM, AM Tuning ScaleAnalogue FM Tuning Range88 to 108 MHz AM Tuning Range520 to 1605 kHz Sensitivity1.8uV (FM), 180uV (AM) Signal to Noise Ratio75dB (FM), 50dB (AM) Distortion0.3% (FM) Selectivity80dB (FM), 30dB (AM) Output770mV (FM), 250mV (AM) Semiconductors12 x transistors, 9 x diodes, 1 x FET, 4 x IC Dimensions18"w x 6"h x 14"d Weight14.5lbs https://auralfetish.com/products/akai-at-2400-stereo-tuner https://cdn.shopify.com/s/files/1/0478/4884/9576/products/akai-at2400-FrontLeft_grande.jpg?v=1617232659 refurbished in stock TypeMono/Stereo Tuner Tuning BandsFM, AM Tuning ScaleAnalogue FM Tuning Range88 to 108 MHz AM Tuning Range520 to 1605 kHz Sensitivity1.8uV (FM), 180uV (AM) Signal to Noise Ratio75dB (FM), 50dB (AM) Distortion0.3% (FM) Selectivity80dB (FM), 30dB (AM) Output770mV (FM), 250mV (AM) Semiconductors12 x transistors, 9 x diodes, 1 x FET, 4 x IC Dimensions18"w x 6"h x 14"d Weight14.5lbs
  • Full service check.
  • Cleaned controls and switches.
US LTL Freight 6886 Vintage Electronics > Audio > Audio Components > Tuner
6900803535016 499.00 USD Antique Sound Lab Wave // Monoblock Tube Amplifier Antique Sound Lab A-WAVE Super nice pair of little (modern) low watt tube amps from the Canadian Antique Sound Lab. If you're looking for something small, clean and easily modded, these are the amps for you! Condition 9/10 Restoration Full service check Cleaned controls, switches, and chassis Specs Output power 8 Watts Frequency response 20 Hz-20 Khz. +/- 1 dB (@ 1w); 30 Hz-18 kHz. +/- 1 dB (@ 8w) Distortion at 1 Watt &lt; 1% (@ 1w); &lt;5% (@ 8w) S/N ratio 70 dB Input impedance 100k Ohm Input sensitivity 500 mVolt Power consumption 40 Watts maximum Output impedance 8 Ohms Dimensions 6" W X 12" D X 5-1/2"H Weight 7 lbs x 2 https://auralfetish.com/products/antique-sound-lab-wave-monoblock-tube-amplifier https://cdn.shopify.com/s/files/1/0478/4884/9576/products/AntiqueSoundLab-Wave-MonoblockTubeAmplifiers-1_grande.jpg?v=1626384953 refurbished in stock Output power 8 Watts Frequency response 20 Hz-20 Khz. +/- 1 dB (@ 1w); 30 Hz-18 kHz. +/- 1 dB (@ 8w) Distortion at 1 Watt < 1% (@ 1w); <5% (@ 8w) S/N ratio 70 dB Input impedance 100k Ohm Input sensitivity 500 mVolt Power consumption 40 Watts maximum Output impedance 8 Ohms Dimensions 6" W X 12" D X 5-1/2"H Weight 7 lbs x 2
  • Full service check
  • Cleaned controls, switches, and chassis
US LTL Freight 5381 Vintage Electronics > Audio > Audio Components > Amplifier
6849720516776 1,799.00 USD Audio Research Dual 75 // Stereo Tube Amplifier Audio Research A-DUAL 75 With a whopping 75 watts per channel of push-pull tube power, this amazing and rare beast will power almost anything with beautifully fluid midrange without any harshness and deliver the warmth that only a high-end tube amplifier can. All of the tube cages are in tact.There are definitely a few scratches on the face that give it a bit of character. Call it patina. Production 1972 Condition Electronic 10/10 Cosmetic 7/10 Restoration Full service check. Cleaned controls, switches, and chassis. Balanced and biased. Detailed. Specs Power output 75 watts per channel into 8Ω (stereo) Frequency response 15Hz to 30kHz Total harmonic distortion 1% Damping factor 14 Input sensitivity 1.5V Signal to noise ratio 80dB Speaker load impedance 4Ω to 16Ω Valve complement 4 x 12AX7, 8 x 6FQ7, 2 x 6550, 1 x 5881 Dimensions 19 x 7 x 12.25 inches Weight 52lbs https://auralfetish.com/products/audio-research-dual-75-stereo-tube-amplifier https://cdn.shopify.com/s/files/1/0478/4884/9576/products/AudioResearchDual75-StereoTubeAmplifer-1_grande.jpg?v=1624397784 refurbished in stock Power output 75 watts per channel into 8Ω (stereo) Frequency response 15Hz to 30kHz Total harmonic distortion 1% Damping factor 14 Input sensitivity 1.5V Signal to noise ratio 80dB Speaker load impedance 4Ω to 16Ω Valve complement 4 x 12AX7, 8 x 6FQ7, 2 x 6550, 1 x 5881 Dimensions 19 x 7 x 12.25 inches Weight 52lbs
  • Full service check.
  • Cleaned controls, switches, and chassis.
  • Balanced and biased.
  • Detailed.
US LTL Freight 5381 Vintage Electronics > Audio > Audio Components > Amplifier
6785702658216 1,899.00 USD B&w Dm6 // Loudspeakers / Custom Restoration Bowers & Wilkins DM6 Bowers &amp; Wilkins DM-6 in Rosewood (originally nicknamed ″the Pregnant Penguin″) has been updated into what we call the MCM Droid. Recapped, reclothed in bright white, and legs powder coated to match, make these a striking example of what the DM6 is, and could have been.The wood isn't perfect, but absolutely stunning from listening distance. We wanted to preserve as much as we could but update the look to give them more contrast and a bit of a modern atomic vibe. Production 1972 Condition 9/10 Serial No.   2889 2890   Restoration   Cleaned and oiled Rosewood cabinet. Repainted front baffle. Reclothed grills in white. Powder coated legs white. Recapped crossovers.   Specs   Type 3 way, 3 driver loudspeaker system Frequency Response 50Hz to 20kHz Recommended Amplifier 25 to 350W Crossover Frequency 500, 6000Hz Impedance 8Ω Sensitivity 95dB Bass 1 x DW250 Midrange 1 x MR150 Tweeter 1 x 19mm TW20 Dimensions 931 x 410 x 380mm   Liner Notes   The DM-6 is an expensively made product using three drivers specially designed for it. The woofer cone is of Bextrene plastic, common in England but rare in the US. The midrange unit is a 6″ cone of DuPont aromatic polyamide, ″Kevlar,″ which is claimed to have extremely high internal damping. (This is the first acoustical use of this material that we know of.) The tweeter is a ¾″ dome. The cabinet is of complex construction, heavily braced and lined with bituminous felt, which can significantly reduce cabinet resonances. -Stereophile.com   Company History In 1966 following a bequest from an elderly lady called Miss Knight, John Bowers founds B&amp;W Electronics Ltd. Because she was so impressed with John Bowers’ knowledge of classical music, and so pleased with the loudspeakers that he had made for her (as a hobby), Miss Knight left him £10,000 in her will to develop a [ Read More ] https://auralfetish.com/products/b-w-dm6-louspeakers-custom-restoration https://cdn.shopify.com/s/files/1/0478/4884/9576/products/Bowers-Wilkins-DM6-Speaker-Front2-1024x819_da80d118-41c7-42b3-a7d8-0c00c07153b6_grande.jpg?v=1622669627 refurbished in stock Type 3 way, 3 driver loudspeaker system Frequency Response 50Hz to 20kHz Recommended Amplifier 25 to 350W Crossover Frequency 500, 6000Hz Impedance 8Ω Sensitivity 95dB Bass 1 x DW250 Midrange 1 x MR150 Tweeter 1 x 19mm TW20 Dimensions 931 x 410 x 380mm
  • Cleaned and oiled Rosewood cabinet.
  • Repainted front baffle.
  • Reclothed grills in white.
  • Powder coated legs white.
  • Recapped crossovers.
US LTL Freight 249 Vintage Electronics > Audio > Audio Components > Speakers
6064684105896 1,300.00 USD Bose 1801 // Solid State Stereo Amplifier Bose BOSE1801 BIG power. Heavy, solid amp with beautiful amber meters. Hypnotic. The 1801 was originally released as the Amp to power the 901's but has the power to push even the most thirsty of speakers. This 1801 has one non-matching replacement knob.  CONDITION YEAR  1973 RESTORATION Complete service check / Detail Cleaned controls, switches, and chassis. SPECS Power output: 250 watts per channel into 8Ω (stereo) Frequency response: 15Hz to 20kHz Total harmonic distortion: 0.5% Input sensitivity: 1.5V Signal to noise ratio: 100dB Speaker load impedance: 4Ω (minimum) Dimensions: 7-3/16 x 18 x 18-1/2 inches Weight: 82lbs LINER NOTES The 1801 and 1800 are Integral Design™ Power Amplifiers with all Silicon Solid-State Circuitry using 14 power transistors per channel. Capable of complete stability with all loudspeaker loads regardless of capacitive or inductive character. They employ fast-acting electronic protection circuits for current limiting. They use computer-grade capacitors throughout the power supply, along with a 2.0kW power transformer and 1300 sq. inches of the heat sink area. They also have a power monitor display using a light-emitting diode array and in the case of the 1801 signal meters as well. https://auralfetish.com/products/bose-1801-solid-state-stereo-amplifier-5896 https://cdn.shopify.com/s/files/1/0478/4884/9576/products/1-Bose-1801-Amplifier-FrontLeft_grande.jpg?v=1614132808 refurbished in stock Power output 250 watts per channel into 8Ω (stereo) Frequency response 15Hz to 20kHz Total harmonic distortion 0.5% Input sensitivity 1.5V Signal to noise ratio 100dB Speaker load impedance 4Ω (minimum) Dimensions 7-3/16 x 18 x 18-1/2 inches Weight 82lbs
  • Full service check / Detail
  • Cleaned controls and switches.
US LTL Freight 5381 Vintage Electronics > Audio > Audio Components > Amplifier
6750085021864 3,999.00 USD Canary Audio M90 // Stereo 300b Tube Amplifier Canary Audio CAM90 Arguably the sexiest 300B tube amp on the planet. Champagne face, and Caviar sound. If you're dreaming of a Class A, Triode, 300B tube amp, this is phenomenal place to start. Proudly designed and made right here in the USA. Condition 9/10 Serial No. M90120O12 Orig. MSRP $8495 Restoration Full service check Cleaned controls and switches Tubes tested great Detailed Specs Type/span&gt; Push-pull stereo triode Class A design. Rated Power Output 24 Watts RMS Input Sensitivity .033 Volts for full output Input Impedance 100,000 Ohms Frequency Response +/- 2dB from 10 Hz to 60,000 Hz Total Harmonic Distortion &lt; 0.5% Signal-to-Noise Ratio -84 dB below 1 Watt Damping Factor 10 Power Consumption 220 Watts (true RMS) Output Impedance 4, 8 Ohm Tube Complement 4 x 300B, 2 x 6SN7, 1 x 12AX7 Tube Sockets/span&gt; Exclusive machined Delrin 300B tube sockets with gold plated pin receptacles. Transformers/span&gt; Oversized hand wound power and output transformers (custom made in USA). Terminals/span&gt; Custom gold plated brass five-way binding posts. Dimensions 17.5" W x 15" D x 9" H Net Weight 46 lbs. https://auralfetish.com/products/canary-audio-m90-stereo-tube-amplifier https://cdn.shopify.com/s/files/1/0478/4884/9576/products/CanaryAudioM90-StereoTubeAmplifier-1-FrontLeft_grande.jpg?v=1621523959 refurbished in stock Type Push-pull stereo triode Class A design. Rated Power Output 24 Watts RMS Input Sensitivity .033 Volts for full output Input Impedance 100,000 Ohms Frequency Response +/- 2dB from 10 Hz to 60,000 Hz Total Harmonic Distortion < 0.5% Signal-to-Noise Ratio -84 dB below 1 Watt Damping Factor 10 Power Consumption 220 Watts (true RMS) Output Impedance 4, 8 Ohm Tube Complement 4 x 300B, 2 x 6SN7, 1 x 12AX7 Tube Sockets Exclusive machined Delrin 300B tube sockets with gold plated pin receptacles. Transformers Oversized hand wound power and output transformers (custom made in USA). Terminals Custom gold plated brass five-way binding posts. Dimensions 17.5" W x 15" D x 9" H Net Weight 46 lbs.
  • Full service check
  • Cleaned controls and switches
  • Tubes tested great
  • Detailed
US LTL Freight 5381 Vintage Electronics > Audio > Audio Components > Amplifier
6793044787368 1,199.00 USD Canton Ergo 80 // Tower Speakers / Orig. Boxes Canton ERGO80 We've uncovered a spectacular pair of Canton Ergo 90's in Ivory. These speakers are outstanding in every way. The fit and finish is meticulous and the sound is exactly what you'd expect given the quality of materials and electronics used to produce this beautiful german work of art. This pair comes complete with their original boxes. Production 1990's Condition 9.5/10 Serial No. 186348 / 186349 Orig. MSRP $1900 Restoration Full service check Cleaned controls, switches, and chassis Tested in our listening room Detailed Specs Produced in Germany Cabinet Style 2 1/2-way, bass reflex floorstanding loudspeaker Woofer 1x cone (Ø 200 mm) Midrange 1x cone (Ø 200 mm) Tweeter 1x dome (Ø 25 mm aluminum manganese) Load capacity 120/160 watts (nominal / music load capacity) Efficiency 87.5 dB Frequency response: Transmission range 22 - 30,000 Hz Transition ranges 300/3500 Hz Impedance 4 ohms https://auralfetish.com/products/canton-ergo-80-speakers https://cdn.shopify.com/s/files/1/0478/4884/9576/products/CantonErgo80-Towerspeakers-White-1_grande.jpg?v=1623194815 refurbished in stock Produced in Germany Cabinet Style 2 1/2-way, bass reflex floorstanding loudspeaker Woofer 1x cone (Ø 200 mm) Midrange 1x cone (Ø 200 mm) Tweeter 1x dome (Ø 25 mm aluminum manganese) Load capacity 120/160 watts (nominal / music load capacity) Efficiency 87.5 dB Frequency response: 22 - 30,000 Hz Transition ranges 300/3500 Hz Impedance 4 ohms Dimensions 38"H x 9.5"W x 10.5"D
  • Full service check
  • Cleaned controls, switches, and chassis
  • Tested in our listening room
  • Detailed
US LTL Freight 249 Vintage Electronics > Audio > Audio Components > Speakers
6849720025256 799.00 USD Celestion Ditton 33 // 3 Way Speakers Celestion C-DITTON 33 The Celestion Ditton 33 is an absolutely beautiful pair of speakers. We were completely taken off guard at how truly musical they sound. To compliment the slight green caste of the wood, we've reclothed them in a striking olive. Production Late 70's Condition 9/10 Serial No. 165632 / 48251 Restoration Full service check Detailed Cabinet wood refreshed Grills reclothed in olive green Specs Enclosure Type 3 Way sealed design Power Handling (RMS) 50 Watts Peak Power Handling 25 Watts Nominal Impedance 8 Ohms Tweeter 1 x 1" Dome Tweeter Midrange 1 x 5" Cone Midrange Woofer 1 x 10" Cast Woofer Dimensions 360 x 610 x 270mm Weight 15.0kg https://auralfetish.com/products/celestion-ditton-33-speakers-custom-grills https://cdn.shopify.com/s/files/1/0478/4884/9576/products/CelestionDitton33-3WaysealedSpeakers-1_grande.jpg?v=1624397879 refurbished in stock Enclosure Type 3 Way sealed design Power Handling (RMS) 50 Watts Peak Power Handling 25 Watts Nominal Impedance 8 Ohms Tweeter 1 x 1" Dome Tweeter Midrange 1 x 5" Cone Midrange Woofer 1 x 10" Cast Woofer Dimensions 360 x 610 x 270mm Weight 15.0kg
  • Full service check
  • Detailed
  • Cabinet wood refreshed
  • Grills reclothed in olive green
US LTL Freight 249 Vintage Electronics > Audio > Audio Components > Speakers
6908190195880 9,999.99 USD Claricon 36-350 // Stereo Receiver Claricon C-36-350 This is a great looking and sounding receiver imported from Japan by World Mark Electronics out of Pittsburgh in the late 60's-early 70's. It's perfect for someone just getting into vintage audio, or a collector looking to add more obscure pieces their collection. PRODUCTION 1970 CONDITION 9/10 SERIAL NO. 3E03550 RESTORATION Full service check Cleaned controls and switches Biased Cabinet restored Detailed SPECS Tuning range FM, AM Power output 30 watts per channel into 8Ω (stereo) Frequency response 30Hz to 25kHz Input sensitivity 3mV (MM), 200mV (line) Signal to noise ratio 50dB (MM), 60dB (line) Channel separation 40dB (MM), 40dB (line) Speaker load impedance 8Ω (minimum) Semiconductors 26 x transistors, 20 x diodes Dimensions 15-7/10 x 5 x 11-3/8 inches https://auralfetish.com/products/claricon-36-350-stereo-receiver https://cdn.shopify.com/s/files/1/0478/4884/9576/products/Claricon36-350-StereoReceiver-1_grande.jpg?v=1626463460 refurbished in stock Tuning range FM, AM Power output 30 watts per channel into 8Ω (stereo) Frequency response 30Hz to 25kHz Input sensitivity 3mV (MM), 200mV (line) Signal to noise ratio 50dB (MM), 60dB (line) Channel separation 40dB (MM), 40dB (line) Speaker load impedance 8Ω (minimum) Semiconductors 26 x transistors, 20 x diodes Dimensions 15-7/10 x 5 x 11-3/8 inches
  • Full service check
  • Cleaned controls and switches
  • Biased
  • Cabinet restored
  • Detailed
US LTL Freight 241 Vintage Electronics > Audio > Audio Components > Receiver
6792983642280 1,299.00 USD Custom Jaymanaa // 1625 Stereo Tube Amplifier / 30wpc Custom CUSTOM-1625 This fabulous custom stereo tube amplifier was purchased from the collection of the late, great Jaymanaa, who was an electronic magician and a prolific tube amp designer/builder. The amp sounds fantastic, and with the grid cap tubes, it's got an amazing vintage look. All tubes are NOS. Note: The left channel bias meter is malfunctioning but still able to bias. Condition 9/10 Restoration Full service check Cleaned controls, switches, and chassis Reflowed solder Biased to -48v Specs Configuration Push-Pull Stereo tube amplifier Output 30 watts per channel THD .3% https://auralfetish.com/products/jaymanaa-high-fidelity-tube-amplifier https://cdn.shopify.com/s/files/1/0478/4884/9576/products/Custom-1625StereoTubeAmplifier-1_grande.jpg?v=1623162266 refurbished in stock Configuration Push-Pull Stereo tube amplifier Output 30 watts per channel THD .3%
  • Full service check
  • Cleaned controls, switches, and chassis
  • Reflowed solder
  • Biased to -48v
US LTL Freight 5381 Vintage Electronics > Audio > Audio Components > Amplifier
6792983543976 1,299.00 USD Custom Jaymanaa // 6jm6 Stereo Tube Amplifier / 30wpc Custom CUSTOM-6JM6 This is another amazing custom stereo tube amp designed and built by Jaymanaa using vintage components. Sadly, Jaymanaa is no longer with us but his legacy lives on in the spectacular work that he did that we're able to continue to enjoy. It's a sweet sounding and amazing looking grid cap amp boasting some serious iron. Condition 9/10 Restoration Full service check Cleaned controls, switches, and chassis Biased circuit Reflowed solder Specs Configuration Push-Pull Stereo tube amplifier Output 30 watts per channel THD .3% https://auralfetish.com/products/jaymanaa-custom-tube-amplifier https://cdn.shopify.com/s/files/1/0478/4884/9576/products/Custom-6JM6-StereoTubeAmplifier-1_grande.jpg?v=1623162943 refurbished in stock Configuration Push-Pull Stereo tube amplifier Output 30 watts per channel THD .3%
  • Full service check
  • Cleaned controls, switches, and chassis
  • Biased circuit
  • Reflowed solder
US LTL Freight 5381 Vintage Electronics > Audio > Audio Components > Amplifier
6839493525672 599.00 USD Custom Turntable / Rega Arm / Ar Platter / Vpi Motor Custom C-TT-VPI-AR This is a truly unique custom turntable assembled from high end components and placed into a custom suspension plinth with a custom acrylic dust cover. And yes, it sounds every bit as good as it looks. Condition 9/10 Specs Speeds 33, 45 Platter Non-ferrous alloy, made by Acoustic Research Tonearm Rega Cartridge Audiotechnica AT450 Motor VPI Suspension Integrated undermount isolation Drive system Belt drive Dimensions 18.5"w x 14.5"d x 6"h Weight 17.8 https://auralfetish.com/products/custom-rega-ar-vpi-turntable https://cdn.shopify.com/s/files/1/0478/4884/9576/products/CustomTurntable-Regal-AR-VPI-1_grande.jpg?v=1623971965 refurbished in stock Speeds 33, 45 Platter Non-ferrous alloy, made by Acoustic Research Tonearm Rega Cartridge Audiotechnica AT450 Motor VPI Suspension Integrated undermount isolation Drive system Belt drive Dimensions 18.5"w x 14.5"d x 6"h Weight 17.8 US LTL Freight 256 Vintage Electronics > Audio > Audio Components > Turntable 6849718190248 249.00 USD Dynaco Af6 // Solid-state Tuner Dynaco D-AF6 Beautiful diminutive Dynaco tuner with timeless lines and a wonderful sound. Production 1969 Condition 9/10 Orig. MSRP $199.95 Restoration Full service check Cleaned controls, switches, and chassis All out-of-spec caps replaced Detailed Specs Type Mono/Stereo Tuner Tuning Bands FM, MW Tuning Scale Analogue Sensitivity 1.75uV (FM), 50uV (MW) Signal to Noise Ratio 65dB (FM) Distortion 0.5% (FM), 2% (MW) Selectivity 65dB (FM), 20dB (MW) Frequency response 20Hz to 15kHz (FM) Dimensions 13.5 x 12 x 4.25 inches Weight 13lbs https://auralfetish.com/products/dynaco-af6-solid-state-tuner https://cdn.shopify.com/s/files/1/0478/4884/9576/products/DynacoAF6-StereoTuner-1_grande.jpg?v=1624397930 refurbished in stock Type Mono/Stereo Tuner Tuning Bands FM, MW Tuning Scale Analogue Sensitivity 1.75uV (FM), 50uV (MW) Signal to Noise Ratio 65dB (FM) Distortion 0.5% (FM), 2% (MW) Selectivity 65dB (FM), 20dB (MW) Frequency response 20Hz to 15kHz (FM) Dimensions 13.5 x 12 x 4.25 inches Weight 13lbs
  • Full service check
  • Cleaned controls, switches, and chassis
  • All out-of-spec caps replaced
  • Detailed
US LTL Freight 6886 Vintage Electronics > Audio > Audio Components > Tuner
6618746421416 849.00 USD Eico St-40 // Integrated Tube Amplifier Eico eicost70 Another swanky 60's tube integrated amp. The Eico's have a bit of a cult following. This is just the right kind of vintage Kool-Aid. Production 1960-63 Condition 7.5/10 Serial No. A15114 Orig. MSRP $99 Restoration Full service check Cleaned controls and switches Replaced 5AR4 tube Detailed Specs Power output 20 watts per channel into 8Ω (stereo) Frequency response 40Hz to 20kHz Total harmonic distortion 1% Damping factor 11 Input sensitivity 3mV (MM), 360mV (line) Speaker load impedance 4Ω to 16Ω Valve complement 2 x 12AX7, 4 x 12DW7, 4 x 7591, 1 x GZ34 Dimensions 403 x 130 x 333mm Weight 32lbs https://auralfetish.com/products/eico-st-40-integrated-tube-amplifier https://cdn.shopify.com/s/files/1/0478/4884/9576/products/Eico-ST40-TubeIntegrated-FrontLeft_grande.jpg?v=1617057620 refurbished in stock Power output 20 watts per channel into 8Ω (stereo) Frequency response 40Hz to 20kHz Total harmonic distortion 1% Damping factor 11 Input sensitivity 3mV (MM), 360mV (line) Speaker load impedance 4Ω to 16Ω Valve complement 2 x 12AX7, 4 x 12DW7, 4 x 7591, 1 x GZ34 Dimensions 403 x 130 x 333mm Weight 32lbs
  • Full service check
  • Cleaned controls and switches
  • Replaced 5AR4 tube
  • Detailed
US LTL Freight 5381 Vintage Electronics > Audio > Audio Components > Amplifier
6792978563240 2,200.00 USD Empire 598 Ii Troubador // Belt Drive Turntable / Glass Dust Cover Empire 598iia Beautiful, elegant, and oh so sweet sounding. There’s no wonder why this turntable has a cult following. This is one of our favorite sounding tables. This 598 II absolutely lights up the room. We've sanded down and completely refinished the plinth and dust cover in a darker stain to create a more dramatic contrast with the brass and then replaced the original plastic with glass that has been sandblasted along the edges. Then we lined the inside of the plinth with dynamat to add more mass and reduce vibration transfer which has taken this table to a whole new level. Like almost all Empire's of this era, there is some minor discoloration on the anodized parts.   The original Empire logo badge is available to be added back onto the table. We prefer the look of it clean, but we're happy to do that for you if you'd like.  Production 70's Condition 9/10 Orig. MSRP $199.95 Restoration Full service check Lubricated all moving parts Custom phono cable Set weight and calibrated tonearm lift Refinished plinth in dark walnut stain Spray finished with pre catalyzed lacquer Replaced plastic dust cover with edge sandblasted glass Lined plinth with Dynamat Detailed Specs Speeds 33.33 and 45rpm (zero error) Rumble lowest of any turntable tested -90 DB RRLL Wow and flutter almost unmeasurable (0.1%) Platter 12" OD cast aluminium two piece Motor hysteresis synchronous type Drive system flexible belt drive Main bearing microhoned oilite bearings Suspension pneumatic Feedback total system gain before acoustic feedback 141dB Cartridge Sumiko Moonstone Liner Notes The Empire 598 turntable was designed to far exceed professional standards of performance. This instrument, in conjunction with other equally high calibre components, will allow you with the press of a button, to hear the full sound of music so akin to the actual performance that only the most expert ear can detect the difference. The Troubador system is designed to produce sound, magnificent in person sound, from stereophonic and standard vinyl records. Long life and trouble free operation are guaranteed for the 598 by an ingenious turntable design that involves only two moving parts, a powerful hysteresis synchronous motor and a heavy aluminium turntable platter individually balanced to the peak of perfection. With cast aluminium platter, fitted with the Empire 990 Tonearm, the handsome and functional looks will enhance any room. This is the world's most perfect record playback system. https://auralfetish.com/products/empire-598-ii-troubador-turntable-sumiko-moonstone-1 https://cdn.shopify.com/s/files/1/0478/4884/9576/products/Empire598IITroubadour-A-Turntable-SumikoMoonstone-GlassDustcover-1_grande.jpg?v=1623001351 refurbished in stock Speeds33.33 and 45rpm (zero error) Rumblelowest of any turntable tested -90 DB RRLL Wow and flutteralmost unmeasurable (0.1%) Platter12" OD cast aluminium two piece Motorhysteresis synchronous type Drive systemflexible belt drive Main bearingmicrohoned oilite bearings Suspensionpneumatic Feedbacktotal system gain before acoustic feedback 141dB CartridgeSumiko Moonstone
  • Full service check
  • Lubricated all moving parts
  • Custom phono cable
  • Set weight and calibrated tonearm lift
  • Refinished plinth in dark walnut stain
  • Spray finished with pre catalyzed lacquer
  • Replaced plastic dust cover with edge sandblasted glass
  • Lined plinth with Dynamat
  • Detailed
US LTL Freight 256 Vintage Electronics > Audio > Audio Components > Turntable
6792978923688 1,700.00 USD Empire 598 Ii Troubador // Belt Drive Turntable / Glass Dust Cover Empire 598iic Another stunning Empire turntable. We've painstakingly sanded down and completely refinished the plinth and dust cover and replaced the original plastic with glass that has been sandblasted along the edges. The inside of the plinth has also been lined with dynamat to add more mass and reduce vibration transfer which has taken this table to a whole new level. Like almost all Empire's of this era, there is some discoloration on the brass and anodized parts.   At some point something was added to the top of the table with epoxy that we weren't able to remove without damaging the table. Our solution was to cover that area with a brass Aural “A”.  Production 70's Condition 8/10 Orig. MSRP $199.95 Restoration Full service check Lubricated all moving parts Custom phono cable Set weight and calibrated tonearm lift Stripped and sanded plinth Spray finished plinth with pre catalyzed lacquer Replaced plastic dust cover with edge sandblasted glass Lined plinth with Dynamat Detailed Specs Speeds 33.33 and 45rpm (zero error) Rumble lowest of any turntable tested -90 DB RRLL Wow and flutter almost unmeasurable (0.1%) Platter 12" OD cast aluminium two piece Motor hysteresis synchronous type Drive system flexible belt drive Main bearing microhoned oilite bearings Suspension pneumatic Feedback total system gain before acoustic feedback 141dB Cartridge Ortofon 2M Red Liner Notes The Empire 598 turntable was designed to far exceed professional standards of performance. This instrument, in conjunction with other equally high calibre components, will allow you with the press of a button, to hear the full sound of music so akin to the actual performance that only the most expert ear can detect the difference. The Troubador system is designed to produce sound, magnificent in person sound, from stereophonic and standard vinyl records. Long life and trouble free operation are guaranteed for the 598 by an ingenious turntable design that involves only two moving parts, a powerful hysteresis synchronous motor and a heavy aluminium turntable platter individually balanced to the peak of perfection. With cast aluminium platter, fitted with the Empire 990 Tonearm, the handsome and functional looks will enhance any room. This is the world's most perfect record playback system. https://auralfetish.com/products/empire-598-ii-troubador-turntable-ortofon-red https://cdn.shopify.com/s/files/1/0478/4884/9576/products/Empire598IITroubadour-C-Turntable-OrtofonRed-GlassDustcover-1_grande.jpg?v=1623162104 refurbished in stock Speeds33.33 and 45rpm (zero error) Rumblelowest of any turntable tested -90 DB RRLL Wow and flutteralmost unmeasurable (0.1%) Platter12" OD cast aluminium two piece Motorhysteresis synchronous type Drive systemflexible belt drive Main bearingmicrohoned oilite bearings Suspensionpneumatic Feedbacktotal system gain before acoustic feedback 141dB CartridgeOrtofon 2M Red
  • Full service check
  • Lubricated all moving parts
  • Custom phono cable
  • Set weight and calibrated tonearm lift
  • Stripped and sanded plinth
  • Spray finished plinth with pre catalyzed lacquer
  • Replaced plastic dust cover with edge sandblasted glass
  • Lined plinth with Dynamat
  • Detailed
US LTL Freight 256 Vintage Electronics > Audio > Audio Components > Turntable
6570704699560 900.00 USD Fairchild 870 // Solid State Monoblock Amplifiers Fairchild fairchild-870 Designed for the rigors of the recording studio, this unique pair of diminutive monoblocks pack some punch. They're industrial. They're funky. And they sound fantastic. Oh, and good luck finding another pair. Production 1972 Condition 8.5/10 Serial No. 4022/4032 Restoration Full service check Cleaned controls and switches Replaced missing driver board connector Detailed Specs Power output 70W RMS into 8Ω Input level .8v for 70W across 8Ω Input Impedance 100K bridging Output Impedance &lt; 5% of load impedance Suggested Load/Impedance 8Ω or higher; 4Ω minimum Frequency Response ±.5db, 20hZ to 20KhZ THD &lt; .4% at full power; typical .2% or better Noise -85dB below rated output Damping Factor 20 or more Power Requirement 117v AC; 50 or 60 cycles at 1 amp Dimensions 4"w x 6"h x 13"d Weight 14lbs ea Documentation ITEM_MODEL Owner's Manual Liner Notes The Fairchild Model 870 power amplifier is designed to meet the need for a high-quality professional monitor amplifier, capable of delivering 70W RMS into an eight on love with peak power capacity to 100 watts. Output power of 70 watts is obtained throughout the entire audio range of 20 Hz to 20 kHz. Fully transistorized solid-state circuit incorporates for protection against overload, short circuit, or open circuit. The entire aplifier, with the exception of output transistors and the power supply section, is located on the plug-in card. This allows instant access to any critical components in the unit for purposes of repair, maintenance, or inspection. The Fairchild Model 870 power amplifier features extremely low distortion, excellent transient response, flat frequency response, high input impedance, and output circuit protection. Suggested uses for the 870 include applications in studio monitoring, sound reinforcement, and in the recording field. https://auralfetish.com/products/fairchild-870-solid-state-monoblock-amplifier-pair https://cdn.shopify.com/s/files/1/0478/4884/9576/products/Fairchild870-Monoblocks-FontLeft_grande.jpg?v=1615336762 refurbished in stock Power output70W RMS into 8Ω Input level.8v for 70W across 8Ω Input Impedance100K bridging Output Impedance< 5% of load impedance Suggested Load/Impedance8Ω or higher; 4Ω minimum Frequency Response±.5db, 20hZ to 20KhZ THDLess than .4% at full power; typical .2% or better Noise-85dB below rated output Damping Factor20 or more Power Requirement117v AC; 50 or 60 cycles at 1 amp Dimensions4"w x 6"h x 13"d Weight14lbs ea
  • Full service check
  • Cleaned controls and switches
  • Replaced missing driver board connector
  • Detailed
US LTL Freight 5381 Vintage Electronics > Audio > Audio Components > Amplifier
6905754583208 1,699.00 USD Fisher 202-t Statesman // Tube Preamplifier Tuner Fisher F-202T With it's solid brass face, this Fisher 202-T Preamp/Tuner is absolutely out of this world. It was available in the Statesman console, or as a standalone piece. The preamp section is basically identical to that of the much lauded Fisher 400C preamp. This is a VERY, VERY nice preamp.Note: The FM tuning eye is not functional. Production 1960 Condition 9/10 Serial No. 31432D Restoration Full service check Cleaned controls and switches Repaired AC sockets Repaired AM Polished brass face Detailed Specs Frequency response 20 to 20,000 CPS plus or -1/2 DV Sensitivity and distortion 2.7mv input for 2v output, with only 0.2% distortion (Magentic); 40mv input for 2v output, with only 0.2% distortion (Ceramic) channel separation better than 45 dB balance control range +7dB to more than -60 dB max input capability Aux 3v, phono 200mv, tape head 150mv low frequency filter 20 dB rejection at 20 CPS (less than 3 dB at 50 CPS) high frequency filter 12 dB rejection at 10Kc less than 3DB at 5Kc Tube Complement 4x 12AX7, 3x 12AT7, 2x 6BJ6, 1x 6BE6, 4x 6AU6, 2x 6FG6, 1x EBF89, 1x ECC88, 1x ECC85, 1x 6CA4, 2x IN541, 2x IN295 (Twenty tubes, plus 4 germanium diodes) inputs 2x Tape head, 2x phono ceramic, 2x phono magnetic, 2x Aux, 2x tape recorder, and 2x monitor (12 total) outputs 2x recorder, 2x main, 1x center (5 total) Documentation Fisher 202-T Sales Brochure https://auralfetish.com/products/fisher-202-t-statesman-tube-preamplifier-tuner https://cdn.shopify.com/s/files/1/0478/4884/9576/products/Fisher202t-Statesman-TubePreamplifierTuner-1_grande.jpg?v=1626386456 refurbished in stock Frequency response 20 to 20,000 CPS plus or -1/2 DV Sensitivity and distortion 2.7mv input for 2v output, with only 0.2% distortion (Magentic); 40mv input for 2v output, with only 0.2% distortion (Ceramic) channel separation better than 45 dB balance control range +7dB to more than -60 dB max input capability Aux 3v, phono 200mv, tape head 150mv low frequency filter 20 dB rejection at 20 CPS (less than 3 dB at 50 CPS) high frequency filter 12 dB rejection at 10Kc less than 3DB at 5Kc Tube Complement 4x 12AX7, 3x 12AT7, 2x 6BJ6, 1x 6BE6, 4x 6AU6, 2x 6FG6, 1x EBF89, 1x ECC88, 1x ECC85, 1x 6CA4, 2x IN541, 2x IN295 (Twenty tubes, plus 4 germanium diodes) inputs 2x Tape head, 2x phono ceramic, 2x phono magnetic, 2x Aux, 2x tape recorder, and 2x monitor (12 total) outputs 2x recorder, 2x main, 1x center (5 total)
  • Full service check
  • Cleaned controls and switches
  • Repaired AC sockets
  • Repaired AM
  • Polished brass face
  • Detailed
US LTL Freight 5381 Vintage Electronics > Audio > Audio Components > Preamp
6849717764264 2,499.00 USD Fisher Allegro A-19 // Tube Stereo Console / With Sonos Fisher F-ALLEGRO A-19 This is one of the coolest small stereo consoles we've ever had the pleasure of offering in our shop. When folded up, the console is a very manageable size. It opens up to reveal the hinged speakers that have been reclothed in a beautiful vintage style silver dimensional acoustic fabric, and a fold down turntable. The audio signal travels from the amp to the speakers via the hinges themselves allowing you to completely remove each speaker without the hassle of cords. And best of all, you can control it with your phone - we've added a brand new Sonos Port ($449 value) to the system to allow you to stream anything you'd like through this gorgeous mid-century stereo console.The amp and tuner have been fully restored. The turntable has been serviced. Legs have been added to allow it to stand freely. And the cabinet has been oiled. PRODUCTION 1962-64 CONDITION 9/10 SERIAL NO. 10735A ORIG. MSRP $349.95 RESTORATION Full service check Cleaned controls, switches, and chassis Recapped both the tuner and amplifier Reclothed in new vintage style silver textured acoustic cloth Turntable serviced  Legs added to make it a floor standing console Sonos Port added to allow digital wifi streaming via mobile or desktop app SPECS Allegro X-19 TypeIntegrated Tube Amplifier Power Output20wpc Tube Complement3x 12ax7, 3x 6AU6 Allegro FM-19 TypeWideband Multiplex Tuner BandsFM Stereo DecoderMPX-78 Tube Complement1x 6AQ8, 3x 12ax7, 2x ELL80 Garrard Autoslim P TypeTurntable Tonearmdie-cast Motor4-pole, shaded Speeds16.66, 33.33, 45, 78rpm Overall Dimensions33w x 29h x 13d Weight65lbs https://auralfetish.com/products/fisher-allegro-a-19-tube-stereo-console-with-sonos https://cdn.shopify.com/s/files/1/0478/4884/9576/products/FisherAllegroA-19-TubeStereoConsole-1_grande.jpg?v=1624398067 refurbished in stock Allegro X-19 Type Integrated Tube AmplifierAllegro X-19 Power Output 20wpcAllegro X-19 Tube Complement 3x 12ax7, 3x 6AU6 Allegro FM-19 Type Wideband Multiplex Tuner Allegro FM-19 Bands FM Allegro FM-19 Stereo Decoder MPX-78 Allegro FM-19 Tube Complement 1x 6AQ8, 3x 12ax7, 2x ELL80 Garrard Autoslim P Type Turntable Garrard Autoslim P Tonearm die-cast Garrard Autoslim P Motor 4-pole, shaded Garrard Autoslim P Speeds 16.66, 33.33, 45, 78rpm Overall Dimensions 33w x 29h x 13d Overall Weight 65lbs
  • Full service check
  • Cleaned controls, switches, and chassis
  • Recapped both the tuner and amplifier
  • Reclothed in new vintage style silver textured acoustic cloth
  • Turntable serviced
  • Legs added to make it a floor standing console
  • Sonos Port added to allow digital wifi streaming via mobile or desktop app
US LTL Freight 251 Vintage Electronics > Audio > Audio Components > Console
6568359723176 750.00 USD Harman Kardon Ax-20 Nocturne // Mono Tube Integrated Amplifier Harman Kardon HK-AX20 Classic late 50's Harman Kardon styling make this (incredibly rare) mono tube integrated an absolute showstopper. Production 1958-59 Condition 9/10 Serial No. 2913669 Orig. MSRP $108.90 Restoration Full service check Cleaned controls and switches Replaced (2) EL84 &amp; (1) EZ81 - JJ Full Detail Specs Power Input105-125 Volts (AC) Power Output20 watts into 8Ω (mono) Signal JacksRCA Speaker TerminalsScrew Type Frequency response15Hz to 30kHz Total harmonic distortion1% Damping factor5 Input sensitivity0.5V Signal to noise ratio90dB Speaker load impedance8Ω or 16Ω Tube Complement7: 12AU7, 12AT7, 12AX7 (2), EL84 (2), 6CA4 Dimensions12"w x 4"h x 11"d Weight18lb Liner Notes 60 seconds. That's all it takes to create a complete stereo electronic center with the new Harmon-Kardon Nocturne, Model AX20. To convert your present system – component or console – to stereo, simply plug the AX20 into your present amplifier. This one connection does it all. With the a X 20 there's no shuttling back-and-forth between two different instruments (you can even touch your present amplifier out of sight); no adapter box to complicate matters. This one unit – the AX20 – controls the power to both amplifiers. It also controls treble, bass, volume, contour, balancing, and equalization for both. The AX20, in brushed copper and black, is strikingly handsome in appearance and outstanding in its performance characteristics. The amplifier delivers 20 watts of hum-free, distortion-free power (40 watt peaks). An exclusive new high-gain phase inverter, utilizing both positive and negative feedback, drives the output tubes with minimum phase shift and excellent stability. As a result, the power amplifier has instantaneous recovery time resulting in uniquely clean and faithful transient response. The AX20 actually produces more clean, useful power than conventional 30 watt amplifiers. The preamplifier is a dual stereo device incorporating ganged bass and treble tone controls, loudness control, contour control, rumble filter, balance control, mode switch, speaker selection, and function switches. Selectable equalization is provided for records and tapes. The second preamplifier delivers half volt output at low impedance. https://auralfetish.com/products/harman-kardon-ax-20-nocturne-tube-amplifier https://cdn.shopify.com/s/files/1/0478/4884/9576/products/harman-kardon-nocturne-ax20-front-left_grande.jpg?v=1615307949 refurbished in stock Power Input105-125 Volts (AC) Power Output20 watts into 8Ω (mono) Signal JacksRCA Speaker TerminalsScrew Type Frequency response15Hz to 30kHz Total harmonic distortion1% Damping factor5 Input sensitivity0.5V Signal to noise ratio90dB Speaker load impedance8Ω or 16Ω Tube Complement7: 12AU7, 12AT7, 12AX7 (2), EL84 (2), 6CA4 Dimensions12"w x 4"h x 11"d Weight18lb
  • Full service check
  • Cleaned controls and switches
  • Replaced (2) EL84 & (1) EZ81 - JJ
  • Full Detail
US LTL Freight 5381 Vintage Electronics > Audio > Audio Components > Amplifier
6814127325352 599.00 USD Harman Kardon Ballad A230 // Integrated Tube Amplifier Harman Kardon BALLAD A230 This is a beautiful little late 50's integrated tube amp. It's missing the cage, but who would want to hide the wonderful glow of the tubes? We're just stoked to have found such a fantastically rare piece. Production 1959 Condition 8/10 Restoration Full service check Cleaned controls, switches, and chassis Replaced output tubes with 4 matched Mullard EL84's Pilot light was previously replaced with a power switch Detailed Specs Power output 15 watts per channel into 8Ω (stereo) Frequency response 15Hz to 70kHz Total harmonic distortion 1% Input sensitivity 3mV (MM), 300mV (line) Signal to noise ratio 60dB (MM), 70dB (line) Speaker load impedance 8Ω to 16Ω Valve complement 1 x GZ34, 4 x EL84, 2 x ECC82, 3 x ECC83 Dimensions 13-13/16 x 4-5/8 x 11-1/2 inches Weight 18lbs Documentation harman Kardon Ballad A320 Owner's Manual Liner Notes The Harman Kardon A230 uses two EL84 output tubes per channel operated conservatively in class AB, self-bias, pentode connected, and a special phase inverter designed for low distortion and high gain with minimum phase shift. https://auralfetish.com/products/harman-kardon-ballad-a230-integrated-tube-amplifier https://cdn.shopify.com/s/files/1/0478/4884/9576/products/HarmanKardon-Ballad-TubeIntegratedAmplifier-1_grande.jpg?v=1623453684 refurbished in stock Power output 15 watts per channel into 8Ω (stereo)Frequency response 15Hz to 70kHzTotal harmonic distortion 1%Input sensitivity 3mV (MM), 300mV (line)Signal to noise ratio 60dB (MM), 70dB (line)Speaker load impedance 8Ω to 16ΩValve complement 1 x GZ34, 4 x EL84, 2 x ECC82, 3 x ECC83Dimensions 13-13/16 x 4-5/8 x 11-1/2 inchesWeight 18lbs
  • Full service check
  • Cleaned controls, switches, and chassis
  • Replaced output tubes with 4 matched Mullard EL84's
  • Pilot light was previously replaced with a power switch
  • Detailed
US LTL Freight 5381 Vintage Electronics > Audio > Audio Components > Amplifier
6793045082280 3,499.00 USD Harman Kardon Citation Ii // Tube Amplifier Harman Kardon CITATION II Widely considered one the most influential tube amplifiers ever made, and you won't find a nicer Citation II anywhere. Period. This amp has been completely rebuilt and sports a full complement of new Gold Lion KT88's. The lettering on the face and chassis is pristine, the transformers are nearly flawless cosmetically (save a few small indentations in the paint), and the sound easily rivals a McIntosh MC275. Some of the folks over here even prefer it. This is one of the most extensive restorations we've ever done. And WOW was it worth it. Production 1959 Condition 9/10 Orig. MSRP $229 Restoration Full service check Cleaned controls, switches, and chassis Rebuilt bias capacitor Replaced 4 power supply capacitors Replaced defective bias pot Replaced speaker terminal strips Replaced cathode capacitors Installed surge suppressor Installed rectifier diodes Replaced 1meg resistors Rewired tube sockets Replaced all tubes (Gold lion KT88's - the rest NOS) .1% distortion in both channels at full power Specs Power output 60 watts per channel into 8Ω (stereo) Frequency response 18Hz to 40kHz Total harmonic distortion 0.5% Damping factor 18 Input sensitivity 1.5V Signal to noise ratio 90dB Speaker load impedance 4Ω to 16Ω Valve complement 4 x KT88, 6 x 12BY7A Dimensions 16-3/8 x 9 x 11-1/2 inches Weight 60lbs Documentation Harman Kardon Citation II Owner's Manual https://auralfetish.com/products/harman-kardon-citation-ii-tube-amplifier https://cdn.shopify.com/s/files/1/0478/4884/9576/products/HarmanKardon-CitationII-StereoTubeAmplifier-1_grande.jpg?v=1626199210 refurbished in stock Power output 60 watts per channel into 8Ω (stereo) Frequency response 18Hz to 40kHz Total harmonic distortion 0.5% Damping factor 18 Input sensitivity 1.5V Signal to noise ratio 90dB Speaker load impedance 4Ω to 16Ω Valve complement 4 x KT88, 6 x 12BY7A Dimensions 16-3/8 x 9 x 11-1/2 inches Weight 60lbs
  • Full service check
  • Cleaned controls, switches, and chassis
  • Rebuilt bias capacitor
  • Replaced 4 power supply capacitors
  • Replaced defective bias pot
  • Replaced speaker terminal strips
  • Replaced cathode capacitors
  • Installed surge suppressor
  • Installed rectifier diodes
  • Replaced 1meg resistors
  • Rewired tube sockets
  • Replaced all tubes (Gold lion KT88's - the rest NOS)
  • .1% distortion in both channels at full power
US LTL Freight 5381 Vintage Electronics > Audio > Audio Components > Amplifier
6824251097256 550.00 USD Hartley 207 Msg // 7" Driver / Mid-tweeter #1 Hartley H-207MSG-1 This beautiful 7" 8 ohm mid-tweeter has been fully tested and is functioning properly. There are no cracks, tears, or repairs. Phenomenal driver with incredibly rich history. Condition 9/10 Orig. MSRP $525 Specs Type 7" mid/tw Nominal Impedance (ohms) 8 Minimum Power Recommendation (RMS) 25 Maximum Power Recommendation (RMS) 75 Maximum Peak Power Recommendation (RMS) 150 Voice Coil Diameter 1" Length Of Wire On Voice Coil (meters) 8 (2 layers) Voice Coil Wire Size #33 Voice Coil Wire Diameter .008" Turns Of Wire On Voice Coil 100 Voice Coil Wire Round Copper With Custom High Temperature Baked Resin Coating D.C. Resistance Of Voice Coil (ohms) 5Ω Voice Coil Axial Length .375" Electromagnetic Coupling Constant (Bl) 8.8 Effective Mass Of Voice Coil, Cone And Spider (grams) 21g Effective Piston Diameter Of Cone 5.625" Maximum Peak To Peak Excursion .062" Free Field Resonance (Hz) 1500 Magnet Material And Structure Custom Coated Ceramic, D.C. Magnetized, Equalized Flux Module Structure (EFM) Total Magnet Weight 5 lbs. Flux Density (Weber/m2) 1.1 Recommended Frequency Range (Hz) 3000-20,000 Liner Notes In the past, very special people have known about HARTLEY speakers. Audiophiles, engineers, musicians, recording technicians, scientists and other professionals who use sound or consider sound to be a very important part of their lives or careers. No matter what the price, HARTLEY speakers are considered among the best available anywhere in the world. Meticulous hand-crafting and unique problem solving of the physics of loudspeakers are the reasons for our long standing reputation. We don't sell a lot of speakers that way, but we don't have to compromise our standards either. In fact some of our drivers require over fifty hand operations to build. https://auralfetish.com/products/hartley-207msg-1-7-driver-midrange https://cdn.shopify.com/s/files/1/0478/4884/9576/products/Hartley-207MSG-1-7inchDriver-1_grande.jpg?v=1623951067 refurbished in stock Type 7" mid/tw Nominal Impedance (ohms) 8 Minimum Power Recommendation (RMS) 25 Maximum Power Recommendation (RMS) 75 Maximum Peak Power Recommendation (RMS) 150 Voice Coil Diameter 1" Length Of Wire On Voice Coil (meters) 8 (2 layers) Voice Coil Wire Size #33 Voice Coil Wire Diameter .008" Turns Of Wire On Voice Coil 100 Voice Coil Wire Round Copper With Custom High Temperature Baked Resin Coating D.C. Resistance Of Voice Coil (ohms) Voice Coil Axial Length .375" Electromagnetic Coupling Constant (Bl) 8.8 Effective Mass Of Voice Coil, Cone And Spider (grams) 21g Effective Piston Diameter Of Cone 5.625" Maximum Peak To Peak Excursion .062" Free Field Resonance (Hz) 1500 Magnet Material And Structure Custom Coated Ceramic, D.C. Magnetized, Equalized Flux Module Structure (EFM) Total Magnet Weight 5 lbs. Flux Density (Weber/m2) 1.1 Recommended Frequency Range (Hz) 3000-20,000
  • Fully tested and performing at manufacturer's specifications.
US LTL Freight 500120 Vintage Electronics > Audio > Audio Components > Driver
6824252178600 450.00 USD Hartley 207 Msg // 7" Driver / Mid-tweeter #2 Hartley H-207MSG-2 This beautiful 7" 8 ohm mid-tweeter has been fully tested and is functioning properly. There was a crack in the cone that was previously professionally repaired. Phenomenal driver with incredibly rich history. Condition 8/10 Orig. MSRP $525 Specs Type 7" mid/tw Nominal Impedance (ohms) 8 Minimum Power Recommendation (RMS) 25 Maximum Power Recommendation (RMS) 75 Maximum Peak Power Recommendation (RMS) 150 Voice Coil Diameter 1" Length Of Wire On Voice Coil (meters) 8 (2 layers) Voice Coil Wire Size #33 Voice Coil Wire Diameter .008" Turns Of Wire On Voice Coil 100 Voice Coil Wire Round Copper With Custom High Temperature Baked Resin Coating D.C. Resistance Of Voice Coil (ohms) 5Ω Voice Coil Axial Length .375" Electromagnetic Coupling Constant (Bl) 8.8 Effective Mass Of Voice Coil, Cone And Spider (grams) 21g Effective Piston Diameter Of Cone 5.625" Maximum Peak To Peak Excursion .062" Free Field Resonance (Hz) 1500 Magnet Material And Structure Custom Coated Ceramic, D.C. Magnetized, Equalized Flux Module Structure (EFM) Total Magnet Weight 5 lbs. Flux Density (Weber/m2) 1.1 Recommended Frequency Range (Hz) 3000-20,000 Liner Notes In the past, very special people have known about HARTLEY speakers. Audiophiles, engineers, musicians, recording technicians, scientists and other professionals who use sound or consider sound to be a very important part of their lives or careers. No matter what the price, HARTLEY speakers are considered among the best available anywhere in the world. Meticulous hand-crafting and unique problem solving of the physics of loudspeakers are the reasons for our long standing reputation. We don't sell a lot of speakers that way, but we don't have to compromise our standards either. In fact some of our drivers require over fifty hand operations to build. The History of Hartley Founded in 1927, by H.A. Hartley in London, England, Hartley coined the phrase "high fidelity". This was a noteworthy beginning for a company who would innovate and change the face of the loudspeaker industry forever. Hartley, with engineer P.K. Turner and ideas from Barker, Voigt, and Olson set out to manufacture [ Read More ] https://auralfetish.com/products/hartley-207msg-2-7-driver-midrange https://cdn.shopify.com/s/files/1/0478/4884/9576/products/Hartley-207MSG-2-7inchDriver-1_grande.jpg?v=1623952752 refurbished in stock Type 7" mid/tw Nominal Impedance (ohms) 8 Minimum Power Recommendation (RMS) 25 Maximum Power Recommendation (RMS) 75 Maximum Peak Power Recommendation (RMS) 150 Voice Coil Diameter 1" Length Of Wire On Voice Coil (meters) 8 (2 layers) Voice Coil Wire Size #33 Voice Coil Wire Diameter .008" Turns Of Wire On Voice Coil 100 Voice Coil Wire Round Copper With Custom High Temperature Baked Resin Coating D.C. Resistance Of Voice Coil (ohms) Voice Coil Axial Length .375" Electromagnetic Coupling Constant (Bl) 8.8 Effective Mass Of Voice Coil, Cone And Spider (grams) 21g Effective Piston Diameter Of Cone 5.625" Maximum Peak To Peak Excursion .062" Free Field Resonance (Hz) 1500 Magnet Material And Structure Custom Coated Ceramic, D.C. Magnetized, Equalized Flux Module Structure (EFM) Total Magnet Weight 5 lbs. Flux Density (Weber/m2) 1.1 Recommended Frequency Range (Hz) 3000-20,000
  • Fully tested and performing at manufacturer's specifications.
US LTL Freight 500120 Vintage Electronics > Audio > Audio Components > Driver
6824251523240 550.00 USD Hartley 207 Msg // 7" Driver / Mid-tweeter #3 Hartley H-207MSG-3 This beautiful 7" 8 ohm mid-tweeter has been fully tested and is functioning properly. There are no cracks, tears, or repairs. Phenomenal driver with incredibly rich history. Condition 9/10 Orig. MSRP $525 Specs Type 7" mid/tw Nominal Impedance (ohms) 8 Minimum Power Recommendation (RMS) 25 Maximum Power Recommendation (RMS) 75 Maximum Peak Power Recommendation (RMS) 150 Voice Coil Diameter 1" Length Of Wire On Voice Coil (meters) 8 (2 layers) Voice Coil Wire Size #33 Voice Coil Wire Diameter .008" Turns Of Wire On Voice Coil 100 Voice Coil Wire Round Copper With Custom High Temperature Baked Resin Coating D.C. Resistance Of Voice Coil (ohms) 5Ω Voice Coil Axial Length .375" Electromagnetic Coupling Constant (Bl) 8.8 Effective Mass Of Voice Coil, Cone And Spider (grams) 21g Effective Piston Diameter Of Cone 5.625" Maximum Peak To Peak Excursion .062" Free Field Resonance (Hz) 1500 Magnet Material And Structure Custom Coated Ceramic, D.C. Magnetized, Equalized Flux Module Structure (EFM) Total Magnet Weight 5 lbs. Flux Density (Weber/m2) 1.1 Recommended Frequency Range (Hz) 3000-20,000 Liner Notes In the past, very special people have known about HARTLEY speakers. Audiophiles, engineers, musicians, recording technicians, scientists and other professionals who use sound or consider sound to be a very important part of their lives or careers. No matter what the price, HARTLEY speakers are considered among the best available anywhere in the world. Meticulous hand-crafting and unique problem solving of the physics of loudspeakers are the reasons for our long standing reputation. We don't sell a lot of speakers that way, but we don't have to compromise our standards either. In fact some of our drivers require over fifty hand operations to build. https://auralfetish.com/products/hartley-207msg-3-7-driver-midrange https://cdn.shopify.com/s/files/1/0478/4884/9576/products/Hartley-207MSG-3-7inchDriver-1_grande.jpg?v=1623952582 refurbished in stock Type 7" mid/tw Nominal Impedance (ohms) 8 Minimum Power Recommendation (RMS) 25 Maximum Power Recommendation (RMS) 75 Maximum Peak Power Recommendation (RMS) 150 Voice Coil Diameter 1" Length Of Wire On Voice Coil (meters) 8 (2 layers) Voice Coil Wire Size #33 Voice Coil Wire Diameter .008" Turns Of Wire On Voice Coil 100 Voice Coil Wire Round Copper With Custom High Temperature Baked Resin Coating D.C. Resistance Of Voice Coil (ohms) Voice Coil Axial Length .375" Electromagnetic Coupling Constant (Bl) 8.8 Effective Mass Of Voice Coil, Cone And Spider (grams) 21g Effective Piston Diameter Of Cone 5.625" Maximum Peak To Peak Excursion .062" Free Field Resonance (Hz) 1500 Magnet Material And Structure Custom Coated Ceramic, D.C. Magnetized, Equalized Flux Module Structure (EFM) Total Magnet Weight 5 lbs. Flux Density (Weber/m2) 1.1 Recommended Frequency Range (Hz) 3000-20,000
  • Fully tested and performing at manufacturer's specifications.
US LTL Freight 500120 Vintage Electronics > Audio > Audio Components > Driver
6824251687080 550.00 USD Hartley 207 Msg // 7" Driver / Mid-tweeter #4 Hartley H-207MSG-4 This beautiful 7" 8 ohm mid-tweeter has been fully tested and is functioning properly. There are no cracks, tears, or repairs. Phenomenal driver with incredibly rich history. Condition 9/10 Orig. MSRP $525 Specs Type 7" mid/tw Nominal Impedance (ohms) 8 Minimum Power Recommendation (RMS) 25 Maximum Power Recommendation (RMS) 75 Maximum Peak Power Recommendation (RMS) 150 Voice Coil Diameter 1" Length Of Wire On Voice Coil (meters) 8 (2 layers) Voice Coil Wire Size #33 Voice Coil Wire Diameter .008" Turns Of Wire On Voice Coil 100 Voice Coil Wire Round Copper With Custom High Temperature Baked Resin Coating D.C. Resistance Of Voice Coil (ohms) 5Ω Voice Coil Axial Length .375" Electromagnetic Coupling Constant (Bl) 8.8 Effective Mass Of Voice Coil, Cone And Spider (grams) 21g Effective Piston Diameter Of Cone 5.625" Maximum Peak To Peak Excursion .062" Free Field Resonance (Hz) 1500 Magnet Material And Structure Custom Coated Ceramic, D.C. Magnetized, Equalized Flux Module Structure (EFM) Total Magnet Weight 5 lbs. Flux Density (Weber/m2) 1.1 Recommended Frequency Range (Hz) 3000-20,000 Liner Notes In the past, very special people have known about HARTLEY speakers. Audiophiles, engineers, musicians, recording technicians, scientists and other professionals who use sound or consider sound to be a very important part of their lives or careers. No matter what the price, HARTLEY speakers are considered among the best available anywhere in the world. Meticulous hand-crafting and unique problem solving of the physics of loudspeakers are the reasons for our long standing reputation. We don't sell a lot of speakers that way, but we don't have to compromise our standards either. In fact some of our drivers require over fifty hand operations to build. https://auralfetish.com/products/hartley-207msg-4-7-driver-midrange https://cdn.shopify.com/s/files/1/0478/4884/9576/products/Hartley-207MSG-4-7inchDriver-1_grande.jpg?v=1623953393 refurbished in stock Type 7" mid/tw Nominal Impedance (ohms) 8 Minimum Power Recommendation (RMS) 25 Maximum Power Recommendation (RMS) 75 Maximum Peak Power Recommendation (RMS) 150 Voice Coil Diameter 1" Length Of Wire On Voice Coil (meters) 8 (2 layers) Voice Coil Wire Size #33 Voice Coil Wire Diameter .008" Turns Of Wire On Voice Coil 100 Voice Coil Wire Round Copper With Custom High Temperature Baked Resin Coating D.C. Resistance Of Voice Coil (ohms) Voice Coil Axial Length .375" Electromagnetic Coupling Constant (Bl) 8.8 Effective Mass Of Voice Coil, Cone And Spider (grams) 21g Effective Piston Diameter Of Cone 5.625" Maximum Peak To Peak Excursion .062" Free Field Resonance (Hz) 1500 Magnet Material And Structure Custom Coated Ceramic, D.C. Magnetized, Equalized Flux Module Structure (EFM) Total Magnet Weight 5 lbs. Flux Density (Weber/m2) 1.1 Recommended Frequency Range (Hz) 3000-20,000
  • Fully tested and performing at manufacturer's specifications.
US LTL Freight 500120 Vintage Electronics > Audio > Audio Components > Driver
6824250146984 695.00 USD Hartley 220 Hs // 10" Driver / Woofer #1 Hartley H-220HS-1 This beautiful 10" 5 ohm woofer has been fully tested and is functioning properly. There are no cracks, tears, or repairs. Phenomenal driver with incredibly rich history. Condition 9/10 Orig. MSRP $650 Restoration Fully tested and performing at manufacturer's specifications. Specs Type 10" woofer Nominal Impedance (ohms) 5 Minimum Power Recommendation (RMS) 25 Maximum Power Recommendation (RMS) 100 Maximum Peak Power Recommendation (RMS) 200 Voice Coil Diameter 1" Length Of Wire On Voice Coil (meters) 10 (2 layers) Voice Coil Wire Size #32 Voice Coil Wire Diameter .010" Turns Of Wire On Voice Coil 125 Voice Coil Wire Round Copper With Custom High Temperature Baked Resin Coating D.C. Resistance Of Voice Coil (ohms) 3.8Ω Voice Coil Axial Length .625" Electromagnetic Coupling Constant (Bl) 11 Effective Mass Of Voice Coil, Cone And Spider (grams) 39g Effective Piston Diameter Of Cone 9" Maximum Peak To Peak Excursion .375" Free Field Resonance (Hz) 28 Magnet Material And Structure Custom Coated Ceramic, D.C. Magnetized, Equalized Flux Module Structure (EFM) Total Magnet Weight 5 lbs. Flux Density (Weber/m2) 1.1 Recommended Frequency Range (Hz) 32-5,000 Liner Notes In the past, very special people have known about HARTLEY speakers. Audiophiles, engineers, musicians, recording technicians, scientists and other professionals who use sound or consider sound to be a very important part of their lives or careers. No matter what the price, HARTLEY speakers are considered among the best available anywhere in the world. Meticulous hand-crafting and unique problem solving of the physics of loudspeakers are the reasons for our long standing reputation. We don't sell a lot of speakers that way, but we don't have to compromise our standards either. In fact some of our drivers require over fifty hand operations to build. https://auralfetish.com/products/hartley-220hs-1-10-driver-woofer https://cdn.shopify.com/s/files/1/0478/4884/9576/products/Hartley-220HS-1-10inchDriver-1_grande.jpg?v=1624301253 refurbished in stock Type 10" woofer Nominal Impedance (ohms) 5 Minimum Power Recommendation (RMS) 25 Maximum Power Recommendation (RMS) 100 Maximum Peak Power Recommendation (RMS) 200 Voice Coil Diameter 1" Length Of Wire On Voice Coil (meters) 10 (2 layers) Voice Coil Wire Size #32 Voice Coil Wire Diameter .010" Turns Of Wire On Voice Coil 125 Voice Coil Wire Round Copper With Custom High Temperature Baked Resin Coating D.C. Resistance Of Voice Coil (ohms) 3.8Ω Voice Coil Axial Length .625" Electromagnetic Coupling Constant (Bl) 11 Effective Mass Of Voice Coil, Cone And Spider (grams) 39g Effective Piston Diameter Of Cone 9" Maximum Peak To Peak Excursion .375" Free Field Resonance (Hz) 28 Magnet Material And Structure Custom Coated Ceramic, D.C. Magnetized, Equalized Flux Module Structure (EFM) Total Magnet Weight 5 lbs. Flux Density (Weber/m2) 1.1 Recommended Frequency Range (Hz) 32-5,000
  • Fully tested and performing at manufacturer's specifications.
US LTL Freight 500120 Vintage Electronics > Audio > Audio Components > Driver
6824250474664 695.00 USD Hartley 220 Hs // 10" Driver / Woofer #3 Hartley H-220HS-3 This beautiful 10" 5 ohm woofer has been fully tested and is functioning properly. There are no cracks, tears, or repairs. Phenomenal driver with incredibly rich history. Condition 9/10 Orig. MSRP $650 Restoration Fully tested and performing at manufacturer's specifications. Specs Type 10" woofer Nominal Impedance (ohms) 5 Minimum Power Recommendation (RMS) 25 Maximum Power Recommendation (RMS) 100 Maximum Peak Power Recommendation (RMS) 200 Voice Coil Diameter 1" Length Of Wire On Voice Coil (meters) 10 (2 layers) Voice Coil Wire Size #32 Voice Coil Wire Diameter .010" Turns Of Wire On Voice Coil 125 Voice Coil Wire Round Copper With Custom High Temperature Baked Resin Coating D.C. Resistance Of Voice Coil (ohms) 3.8Ω Voice Coil Axial Length .625" Electromagnetic Coupling Constant (Bl) 11 Effective Mass Of Voice Coil, Cone And Spider (grams) 39g Effective Piston Diameter Of Cone 9" Maximum Peak To Peak Excursion .375" Free Field Resonance (Hz) 28 Magnet Material And Structure Custom Coated Ceramic, D.C. Magnetized, Equalized Flux Module Structure (EFM) Total Magnet Weight 5 lbs. Flux Density (Weber/m2) 1.1 Recommended Frequency Range (Hz) 32-5,000 Liner Notes In the past, very special people have known about HARTLEY speakers. Audiophiles, engineers, musicians, recording technicians, scientists and other professionals who use sound or consider sound to be a very important part of their lives or careers. No matter what the price, HARTLEY speakers are considered among the best available anywhere in the world. Meticulous hand-crafting and unique problem solving of the physics of loudspeakers are the reasons for our long standing reputation. We don't sell a lot of speakers that way, but we don't have to compromise our standards either. In fact some of our drivers require over fifty hand operations to build. https://auralfetish.com/products/hartley-220hs-3-10-driver-woofer https://cdn.shopify.com/s/files/1/0478/4884/9576/products/Hartley-220HS-3-10inchDriver-1_grande.jpg?v=1624301270 refurbished in stock Type 10" woofer Nominal Impedance (ohms) 5 Minimum Power Recommendation (RMS) 25 Maximum Power Recommendation (RMS) 100 Maximum Peak Power Recommendation (RMS) 200 Voice Coil Diameter 1" Length Of Wire On Voice Coil (meters) 10 (2 layers) Voice Coil Wire Size #32 Voice Coil Wire Diameter .010" Turns Of Wire On Voice Coil 125 Voice Coil Wire Round Copper With Custom High Temperature Baked Resin Coating D.C. Resistance Of Voice Coil (ohms) 3.8Ω Voice Coil Axial Length .625" Electromagnetic Coupling Constant (Bl) 11 Effective Mass Of Voice Coil, Cone And Spider (grams) 39g Effective Piston Diameter Of Cone 9" Maximum Peak To Peak Excursion .375" Free Field Resonance (Hz) 28 Magnet Material And Structure Custom Coated Ceramic, D.C. Magnetized, Equalized Flux Module Structure (EFM) Total Magnet Weight 5 lbs. Flux Density (Weber/m2) 1.1 Recommended Frequency Range (Hz) 32-5,000
  • Fully tested and performing at manufacturer's specifications.
US LTL Freight 500120 Vintage Electronics > Audio > Audio Components > Driver
6824250572968 695.00 USD Hartley 220 Hs // 10" Driver / Woofer #5 Hartley H-220HS-5 This beautiful 10" 5 ohm woofer has been fully tested and is functioning properly. There are no cracks, tears, or repairs. Phenomenal driver with incredibly rich history. Condition 9/10 Orig. MSRP $650 Restoration Fully tested and performing at manufacturer's specifications. Specs Type 10" woofer Nominal Impedance (ohms) 5 Minimum Power Recommendation (RMS) 25 Maximum Power Recommendation (RMS) 100 Maximum Peak Power Recommendation (RMS) 200 Voice Coil Diameter 1" Length Of Wire On Voice Coil (meters) 10 (2 layers) Voice Coil Wire Size #32 Voice Coil Wire Diameter .010" Turns Of Wire On Voice Coil 125 Voice Coil Wire Round Copper With Custom High Temperature Baked Resin Coating D.C. Resistance Of Voice Coil (ohms) 3.8Ω Voice Coil Axial Length .625" Electromagnetic Coupling Constant (Bl) 11 Effective Mass Of Voice Coil, Cone And Spider (grams) 39g Effective Piston Diameter Of Cone 9" Maximum Peak To Peak Excursion .375" Free Field Resonance (Hz) 28 Magnet Material And Structure Custom Coated Ceramic, D.C. Magnetized, Equalized Flux Module Structure (EFM) Total Magnet Weight 5 lbs. Flux Density (Weber/m2) 1.1 Recommended Frequency Range (Hz) 32-5,000 Liner Notes In the past, very special people have known about HARTLEY speakers. Audiophiles, engineers, musicians, recording technicians, scientists and other professionals who use sound or consider sound to be a very important part of their lives or careers. No matter what the price, HARTLEY speakers are considered among the best available anywhere in the world. Meticulous hand-crafting and unique problem solving of the physics of loudspeakers are the reasons for our long standing reputation. We don't sell a lot of speakers that way, but we don't have to compromise our standards either. In fact some of our drivers require over fifty hand operations to build. https://auralfetish.com/products/hartley-220hs-5-10-driver-woofer https://cdn.shopify.com/s/files/1/0478/4884/9576/products/Hartley-220HS-5-10inchDriver-1_grande.jpg?v=1624301283 refurbished in stock Type 10" woofer Nominal Impedance (ohms) 5 Minimum Power Recommendation (RMS) 25 Maximum Power Recommendation (RMS) 100 Maximum Peak Power Recommendation (RMS) 200 Voice Coil Diameter 1" Length Of Wire On Voice Coil (meters) 10 (2 layers) Voice Coil Wire Size #32 Voice Coil Wire Diameter .010" Turns Of Wire On Voice Coil 125 Voice Coil Wire Round Copper With Custom High Temperature Baked Resin Coating D.C. Resistance Of Voice Coil (ohms) 3.8Ω Voice Coil Axial Length .625" Electromagnetic Coupling Constant (Bl) 11 Effective Mass Of Voice Coil, Cone And Spider (grams) 39g Effective Piston Diameter Of Cone 9" Maximum Peak To Peak Excursion .375" Free Field Resonance (Hz) 28 Magnet Material And Structure Custom Coated Ceramic, D.C. Magnetized, Equalized Flux Module Structure (EFM) Total Magnet Weight 5 lbs. Flux Density (Weber/m2) 1.1 Recommended Frequency Range (Hz) 32-5,000
  • Fully tested and performing at manufacturer's specifications.
US LTL Freight 500120 Vintage Electronics > Audio > Audio Components > Driver
6824250736808 695.00 USD Hartley 220 Hs // 10" Driver / Woofer #6 Hartley H-220HS-6 This beautiful 10" 5 ohm woofer has been fully tested and is functioning properly. There are no cracks, tears, or repairs. Phenomenal driver with incredibly rich history. Condition 9/10 Orig. MSRP $650 Restoration Fully tested and performing at manufacturer's specifications. Specs Type 10" woofer Nominal Impedance (ohms) 5 Minimum Power Recommendation (RMS) 25 Maximum Power Recommendation (RMS) 100 Maximum Peak Power Recommendation (RMS) 200 Voice Coil Diameter 1" Length Of Wire On Voice Coil (meters) 10 (2 layers) Voice Coil Wire Size #32 Voice Coil Wire Diameter .010" Turns Of Wire On Voice Coil 125 Voice Coil Wire Round Copper With Custom High Temperature Baked Resin Coating D.C. Resistance Of Voice Coil (ohms) 3.8Ω Voice Coil Axial Length .625" Electromagnetic Coupling Constant (Bl) 11 Effective Mass Of Voice Coil, Cone And Spider (grams) 39g Effective Piston Diameter Of Cone 9" Maximum Peak To Peak Excursion .375" Free Field Resonance (Hz) 28 Magnet Material And Structure Custom Coated Ceramic, D.C. Magnetized, Equalized Flux Module Structure (EFM) Total Magnet Weight 5 lbs. Flux Density (Weber/m2) 1.1 Recommended Frequency Range (Hz) 32-5,000 Liner Notes In the past, very special people have known about HARTLEY speakers. Audiophiles, engineers, musicians, recording technicians, scientists and other professionals who use sound or consider sound to be a very important part of their lives or careers. No matter what the price, HARTLEY speakers are considered among the best available anywhere in the world. Meticulous hand-crafting and unique problem solving of the physics of loudspeakers are the reasons for our long standing reputation. We don't sell a lot of speakers that way, but we don't have to compromise our standards either. In fact some of our drivers require over fifty hand operations to build. https://auralfetish.com/products/hartley-220hs-6-10-driver-woofer https://cdn.shopify.com/s/files/1/0478/4884/9576/products/Hartley-220HS-6-10inchDriver-1_grande.jpg?v=1624301294 refurbished in stock Type 10" woofer Nominal Impedance (ohms) 5 Minimum Power Recommendation (RMS) 25 Maximum Power Recommendation (RMS) 100 Maximum Peak Power Recommendation (RMS) 200 Voice Coil Diameter 1" Length Of Wire On Voice Coil (meters) 10 (2 layers) Voice Coil Wire Size #32 Voice Coil Wire Diameter .010" Turns Of Wire On Voice Coil 125 Voice Coil Wire Round Copper With Custom High Temperature Baked Resin Coating D.C. Resistance Of Voice Coil (ohms) 3.8Ω Voice Coil Axial Length .625" Electromagnetic Coupling Constant (Bl) 11 Effective Mass Of Voice Coil, Cone And Spider (grams) 39g Effective Piston Diameter Of Cone 9" Maximum Peak To Peak Excursion .375" Free Field Resonance (Hz) 28 Magnet Material And Structure Custom Coated Ceramic, D.C. Magnetized, Equalized Flux Module Structure (EFM) Total Magnet Weight 5 lbs. Flux Density (Weber/m2) 1.1 Recommended Frequency Range (Hz) 32-5,000
  • Fully tested and performing at manufacturer's specifications.
US LTL Freight 500120 Vintage Electronics > Audio > Audio Components > Driver
6824250998952 749.00 USD Hartley 220 Msg // 10" Driver / Full Range Hartley H-220MSG-1 This beautiful 10" 6 ohm full-range driver has been fully tested and is functioning properly. There are no cracks, tears, or repairs. Phenomenal driver with incredibly rich history. Condition 9/10 Orig. MSRP $749 Restoration Fully tested and performing at manufacturer's specifications. Specs Type 10" full range Nominal Impedance (ohms) 6 Minimum Power Recommendation (RMS) 25 Maximum Power Recommendation (RMS) 75 Maximum Peak Power Recommendation (RMS) 150 Voice Coil Diameter 1" Length Of Wire On Voice Coil (meters) 10 (2 layers) Voice Coil Wire Size #31 Voice Coil Wire Diameter .010" Turns Of Wire On Voice Coil 125 Voice Coil Wire Round Copper With Custom High Temperature Baked Resin Coating D.C. Resistance Of Voice Coil (ohms) 3.8Ω Voice Coil Axial Length .625" Electromagnetic Coupling Constant (Bl) 11 Effective Mass Of Voice Coil, Cone And Spider (grams) 38g Effective Piston Diameter Of Cone 9" Maximum Peak To Peak Excursion .375" Free Field Resonance (Hz) 28 Magnet Material And Structure Custom Coated Ceramic, D.C. Magnetized, Equalized Flux Module Structure (EFM) Total Magnet Weight 5 lbs. Flux Density (Weber/m2) 1.1 Recommended Frequency Range (Hz) 32-20,000 Liner Notes In the past, very special people have known about HARTLEY speakers. Audiophiles, engineers, musicians, recording technicians, scientists and other professionals who use sound or consider sound to be a very important part of their lives or careers. No matter what the price, HARTLEY speakers are considered among the best available anywhere in the world. Meticulous hand-crafting and unique problem solving of the physics of loudspeakers are the reasons for our long standing reputation. We don't sell a lot of speakers that way, but we don't have to compromise our standards either. In fact some of our drivers require over fifty hand operations to build. https://auralfetish.com/products/hartley-220msg-1-10-driver-full-range https://cdn.shopify.com/s/files/1/0478/4884/9576/products/Hartley-220MSG-1-10inch-FullRange-Friver-1_grande.jpg?v=1624301200 refurbished in stock Type 10" full range Nominal Impedance (ohms) 6 Minimum Power Recommendation (RMS) 25 Maximum Power Recommendation (RMS) 75 Maximum Peak Power Recommendation (RMS) 150 Voice Coil Diameter 1" Length Of Wire On Voice Coil (meters) 10 (2 layers) Voice Coil Wire Size #31 Voice Coil Wire Diameter .010" Turns Of Wire On Voice Coil 125 Voice Coil Wire Round Copper With Custom High Temperature Baked Resin Coating D.C. Resistance Of Voice Coil (ohms) 3.8Ω Voice Coil Axial Length .625" Electromagnetic Coupling Constant (Bl) 11 Effective Mass Of Voice Coil, Cone And Spider (grams) 38g Effective Piston Diameter Of Cone 9" Maximum Peak To Peak Excursion .375" Free Field Resonance (Hz) 28 Magnet Material And Structure Custom Coated Ceramic, D.C. Magnetized, Equalized Flux Module Structure (EFM) Total Magnet Weight 5 lbs. Flux Density (Weber/m2) 1.1 Recommended Frequency Range (Hz) 32-20,000
  • Fully tested and performing at manufacturer's specifications.
US LTL Freight 500120 Vintage Electronics > Audio > Audio Components > Driver
6607064170664 699.00 USD Heathkit-daystrom Aa151 // Integrated Tube Amplifier Heathkit heAA151 This mid-century tube amp gives off some serious Atomic Age vibes. The gorgeous leatherette cabinet with offset chrome trim framing a pinstriped faceplate is sure to turn heads. With a few minor blemishes (fewer than most of its age), this baby is in great condition. Note: The EQ controls were never added to this build. Production 1962 Condition 9/10 Orig. MSRP $59.95 Restoration Full service check Cleaned controls and switches Specs Power output14 watts per channel into 8Ω (stereo) Frequency response30Hz to 15kHz Total harmonic distortion2% Damping factor10 Input sensitivity4mV (MM), 200mV (line) Signal to noise ratio55dB (MM), 65dB (line) Channel separation35dB (line) Valve complement2 x 6EU7, 2 x 6AU6, 2 x 6AN8, 4 x EL84, 1 x GZ34 Dimensions15 x 5.25 x 11 inches Weight25lbs https://auralfetish.com/products/heathkit-daystrom-aa151-integrated-amplifier https://cdn.shopify.com/s/files/1/0478/4884/9576/products/HeathkitDaystrom-AA151-IntegratedAmplifier-FrontLeft_grande.jpg?v=1616524783 refurbished in stock Power output14 watts per channel into 8Ω (stereo) Frequency response30Hz to 15kHz Total harmonic distortion2% Damping factor10 Input sensitivity4mV (MM), 200mV (line) Signal to noise ratio55dB (MM), 65dB (line) Channel separation35dB (line) Valve complement2 x 6EU7, 2 x 6AU6, 2 x 6AN8, 4 x EL84, 1 x GZ34 Dimensions15 x 5.25 x 11 inches Weight25lbs
  • Full service check
  • Cleaned controls and switches
  • Corrected L/R wiring on Aux input
  • Fully re-tubed with good testing, old stock tubes
  • EQ and mono select switch circuits were never built and bypassed
  • Original volume pot is very hard to find and was left with some scratchiness in the upper 20% of its range, after many cleanings
  • Tested average of 0.4%THD between both channels
  • This unit tests with better frequency specs than original
US LTL Freight 5381 Vintage Electronics > Audio > Audio Components > Amplifier
6594850652328 699.00 USD Heathkit-daystrom Aj-11 / Ac-11 // Tube Tuner / Mpx Heathkit AJ11-AC11 With the styling of a late 50's Chevy this vintage tuner is one serious fox. Wrapped in luggage tan with chrome trim. Comes complete with its companion MPX adapter to give you stereo FM. There is a slight bend in the bottom right-hand face chrome and an abrasion in the "leather" along the bottom front edge. Otherwise, It's pretty near immaculate. PRODUCTION YEAR  1965 CONDITION 9/10 ORIG. MSRP $89 RESTORATION AJ-11 Full service check Cleaned controls and switches Cleaned all tube sockets Recapped power supply All tubes test good Replaced power cord Replaced dial lamps with LEDs Replaced shorted 6BA6 tube AC-11 Full service check Cleaned controls Cleaned all tube sockets Tested tubes Replaced weak 12AU7 tube SPECS AJ-11  Superheterodyne (common); ZF/IF 455/10700 kHz Separate AM and FM tuning indicator (2 mag.eyes) Wave bands Broadcast (BC) and FM or UHF. Dimensions (WHD)15.75 x 5.25 x 11 inch / 400 x 133 x 279 mm Net weight 8.6 kg / 18 lb 15.1 oz (18.943 lb) TUBE COMPLEMENT Daystrom 6CY5, Daystrom 6EZ8, Daystrom 6AU6 (x3), Daystrom 6BN8 (x2), Daystrom 6BE6, Daystrom 6BA6, Unkown 6BA6 AC-11 Tube Complement Philco 12AU7, RCA 12AU7 (x2) https://auralfetish.com/products/heathkit-daystrom-aj-11-ac-11-tube-tuner-mpx https://cdn.shopify.com/s/files/1/0478/4884/9576/products/Heathkit-Daystrom-AJ11-AC11-Tuner-FrontLeft_grande.jpg?v=1616082609 refurbished in stock AJ-11 TypeSuperheterodyne tunerAJ-11 Tuning rangeFM, AMAJ-11 ZF/IF455/10700 kHzAJ-11 IndicatorsSeparate indicators for AM and FM tuning (2 mag. eyes)AJ-11 Tuning BandsBroadcast (BC) and FM or UHF.AJ-11 Dimensions15.75 x 5.25 x 11 inch / 400 x 133 x 279 mmAJ-11 Weight8.6 kg / 18 lb 15.1 oz (18.943 lb)AJ-11 Tube ComplementDaystrom 6CY5, Daystrom 6EZ8, Daystrom 6AU6 (x3), Daystrom 6BN8 (x2), Daystrom 6BE6, Daystrom 6BA6, Unkown 6BA6 AC-11 Channel SeparationAdjustable AC-11 Tube ComplementPhilco 12AU7, RCA 12AU7 (x2)

AJ-11

  • Full service check
  • Cleaned controls and switches
  • Cleaned all tube sockets
  • Recapped power supply
  • All tubes test good
  • Replaced power cord
  • Replaced dial lamps with LEDs
  • Replaced shorted 6BA6 tube

AC-11

  • Full service check
  • Cleaned controls
  • Cleaned all tube sockets
  • Tested tubes
  • Replaced weak 12AU7 tube

US LTL Freight 6886 Vintage Electronics > Audio > Audio Components > Tuner
6288801497256 450.00 USD Hh Scott 330d // Am/fm Stereo Tube Tuner HH Scott Scott330D Vintage HH Scott all the way. Nothing quite compares to their design. YEAR 1961 CONDITION 9/10 RESTORATION Complete service check Cleaned all pots and switches Removed and restuffed the DC supply filter capacitor Detail inside and out SPECS Function AM-FM Tuner Mono, Simulcast Stereo. Tuning range FM 87/109 Mhz Tuning range AM 535/1605 Khz Sensitivity IHF 2.0 µv THD 0.5% Selectivity&gt;50 dB Frequency Response 20/20 Khz Tube complement 12 tubes 6BS8, 6AU6(4), 6U8, 2AU7(2), 6CN7, 6BA6, 6BE6, 6X4 LINER NOTES The AM &amp; FM tuners can be operated simultaneously (one channel for AM, FM on the other) for the original AM/FM stereo "simulcast". https://auralfetish.com/products/hh-scott-330d-tube-tuner https://cdn.shopify.com/s/files/1/0478/4884/9576/products/HHScott-330D-FrontLeft_grande.jpg?v=1613763394 refurbished in stock Function AM-FM Tuner Mono, Simulcast Stereo. Tuning range FM 87/109 Mhz Tuning range AM 535/1605 Khz Sensitivity IHF 2.0 µv THD 0.5% Selectivity >50 dB Frequency Response 20/20 Khz Tube complement 12 tubes 6BS8, 6AU6(4), 6U8, 2AU7(2), 6CN7, 6BA6, 6BE6
  • Complete service check
  • Cleaned all pots and switches
  • Removed and restuffed the DC supply filter capacitor
  • Detail inside and out
US LTL Freight 6886 Vintage Electronics > Audio > Audio Components > Tuner
6785500479656 1,799.00 USD Hh Scott Stereomaster 499 // Solid State Quad Integrated Amplifier HH Scott SCOTT499 This is a stunning and incredibly rare HH Scott piece. From what we can gather, this may have just been the very first quadraphonic amplifier to make it to market (launched in 1969). The walnut cabinet is gorgeous. The black face is striking and all but flawless. And the 4 VU meters are absolutely mesmerizing. This is truly a beautiful piece of audio history. Production 1969 Condition 9/10 Serial No. 00621654 Orig. MSRP $459.90 Restoration Full service check Cleaned controls and switches   Specs Frequency response 15-30,000Hz ±1dB Channels 4 (Quadrophonic) Power output 35W RMS at 8Ω Harmonic Distortion 0.5% at rated output hum &amp; noise (phono) -65dB Input sensitivity high level (extra) 0.50V, phono high 3.0mV, phono low 6.0mV, tape 1.0mV, mic 10mV Meters independent VU meter per channel (4) Feature tape monitoring facilities Feature loudness compensation Feature high and low filtering Jacks four front-panel microphone jacks Tone and volume Independent tone and volume controls for each of the four channels Dimensions 18.5” W x 12”D x 6.25”H Liner Notes The H H Scott 499 4-channel stereo amplifier dates from the very beginning of the quadraphonic era. It's worth owning as one of the last real HH Scott components made before HH Scott, Inc went into receivership in 1973. Schneider of Germany purchased HH Scott shortly after this amplifier was released to the market. The 499 is a top of the line component. Made in the USA, the unit is superbly engineered, and has an absolutely killer amplifier section. When it was introduced in 1969, this unit cost more than a McIntosh MA 5100 or a MAC 1700 receiver – very expensive – and few were made. A rare bird, indeed. https://auralfetish.com/products/hh-scott-model-499-solid-state-quad-amplifier https://cdn.shopify.com/s/files/1/0478/4884/9576/products/HHScott-Stereomaster499-QuadIntegratedAmplifier-1_grande.jpg?v=1623000061 refurbished in stock Frequency response 15-30,000Hz ±1dB Channels 4 (Quadrophonic) Power output 35W RMS at 8Ω Harmonic Distortion 0.5% at rated output Signal-to-Noise Ratio Phono: 60 dB; Aux: 80 dB Hum & noise (phono) -65dB Input sensitivity High level (extra) 0.50V, phono high 3.0mV, phono low 6.0mV, tape 1.0mV, mic 10mV Tone and volume Independent tone and volume controls for each of the four channels Meters Independent VU meter per channel (4) Features Tape monitoring facilities Features Loudness compensation Features High and low filtering Jacks Four front-panel microphone jacks Dimensions 18.5” W x 12”D x 6.25”H Weight 27.5lbs
  • Full service check
  • Cleaned controls and switches
  • Replaced electrolytic coupling capacitors in all four channels
  • Repaired one driver board
  • Repaired chips on cabinet
  • Detailed
US LTL Freight 5381 Vintage Electronics > Audio > Audio Components > Amplifier
6814153998504 2,799.00 USD Jbl 375 Drivers With H93 Horns // Driver JBL 375 DRIVERS WITH H93 HORNS If you've made it to this listing, we're assuming you know EXACTLY what these are and have a use for them in your Paragon, Hartsfield, Olympus or Sovereign... or you're doing some kind of amazing custom build (that we'd be stoked to hear about). This pair has been tested and given the good housekeeping seal of approval. Condition 9/10 Serial No. Driver: 8172/8177Horns: 14953/15034 The History of JBL JBL was founded by James Bullough Lansing (1902–1949) who was an American audio engineer and loudspeaker designer most notable for establishing two audio companies that bear his name, Altec Lansing and JBL, the latter taken from his initials.Lansing and his business partner Ken Decker started a company in 1927, in https://auralfetish.com/products/jbl-375-drivers-with-h93-horns-driver https://cdn.shopify.com/s/files/1/0478/4884/9576/products/JBL-375Drivers-H93Horn-1_grande.jpg?v=1623454408 refurbished in stock Jbl 375 Drivers With H93 Horns // Driver US LTL Freight 500120 Vintage Electronics > Audio > Audio Components > Driver 6793044590760 1,599.00 USD Jbl L50 // Three Way Loudspeaker JBL L50 These are a super clean pair of JBL L50 3 way speakers sporting NOS wave grilles (complete with their tags folks!). They are a fantastic sounding speaker with style for days. Note: a few of the pegs on the front of the cabinet are missing a tooth. They still hold the grills on, just not as tight. Production 1977-81 Condition 9/10 Serial No. 53506/53511 Orig. MSRP $276 Restoration Full service check Listening room tested for 20 hrs Wood refreshed New NOS grills Specs Type 3 way, 3 driver loudspeaker system Power Handling 35W Crossover Frequency 800, 3000Hz Impedance 8Ω Sensitivity 88dB Bass 1 x 250mm Midrange 1 x 130mm Tweeter 1 x 36mm Finish Dimensions 622 x 362 x 314mm Weight 47lbs Documentation JBL L50 Owner's Manual Liner Notes The JBL L50 is a direct result of the thorough, innovative engineering that produced the remarkable L212 and L110.Because it incorporates many of their technical advances - for instance, a crossover network closely approximating that of the L110 - it delivers much of the exceptional spaciousness and clarity found in its more costly predecessors. https://auralfetish.com/products/jbl-l50-speakers https://cdn.shopify.com/s/files/1/0478/4884/9576/products/JBL-L50-Speakers-1_grande.jpg?v=1623446040 refurbished in stock Type 3 way, 3 driver loudspeaker system Power Handling 35W Crossover Frequency 800, 3000Hz Impedance Sensitivity 88dB Bass 1 x 250mm Midrange 1 x 130mm Tweeter 1 x 36mm Finish oiled walnut Dimensions 622 x 362 x 314mm Weight 47lbs
  • Full service check
  • Listening room tested for 20 hrs
  • Wood refreshed
  • New NOS grills
US LTL Freight 249 Vintage Electronics > Audio > Audio Components > Speakers
6793044983976 999.00 USD Jbl L75 Minuet // Bookshelf Speakers JBL MINUET This is a gorgeous pair of diminutive speakers that are as rare as they are captivating. Producing a sound that bests many speakers several times their size, it's hard not to fall in love with these little gems. The cabinets and are in great shape, and the iconic lattice grilles are beautiful and completely intact. Production 1967 Condition 9/10 Restoration Full service check Cleaned controls, switches, and chassis Cabinets refreshed Specs Type1 way, 2 driver loudspeaker system Full Range1 x LE8T Sensitivity89dB at 1W Frequency Response35 - 15,000Hz Bass Radiator1 x PR8 passive Documentation JBL L75 Minuet Owner's Manual Liner Notes The JBL Minuet employs the remarkable JBL LE8T to reproduce the full range of musical tones with lifelike precision. The cone area of the LE8T is effectively doubled in the low frequency range by a pneumatically driven passive radiator for firm, powerful bass and a warm, spacious quality well up into the mid-range. The combination of the LE8T and the PR8 passive radiator achieves dramatic tonal span and dynamic range from this small, versatile loudspeaker system. The JBL Minuet is capable of purel, undistorted sound even at very high loudness levels...every note is a verbatim copy of the original performance. https://auralfetish.com/products/jbl-minuet-speakers https://cdn.shopify.com/s/files/1/0478/4884/9576/products/JBLL75Minuet-BookshelfSpeaker-1_grande.jpg?v=1623192927 refurbished in stock Type1 way, 2 driver loudspeaker system Full Range1 x LE8T Sensitivity89dB at 1W Frequency Response35 - 15,000Hz Bass Radiator1 x PR8 passive Dimensions 9.5"H x 16.5"W x 8"D
  • Full service check
  • Cleaned controls, switches, and chassis
  • Cabinets refreshed
US LTL Freight 249 Vintage Electronics > Audio > Audio Components > Speakers
6849718845608 699.00 USD Jbl L77 // Lancer 77 Speakers JBL J-L77 The L77 Lancers are a fabulous pair of bookshelf speakers in beautiful condition. They are just as well suited to work on their sides as they are upright. Production 1971 Condition 9/10 Serial No. 119515/119530 Orig. MSRP $198 ea Restoration Full funciton test on all drivers (6). Crossover fully tested. All out-of-spec caps replaced. Refinished cabinets. Specs Type 2 way, 3 driver loudspeaker system Power Handling 30W Crossover Frequency 2500Hz Impedance 8Ω Bass Radiator 1 x PR10 Bass 1 x LE10A Tweeter 1 x LE20-1 Dimensions 14" x 23.5" x 12" Weight 48.5lbs. https://auralfetish.com/products/jbl-l77-lancer-77-speakers https://cdn.shopify.com/s/files/1/0478/4884/9576/products/JBLL77Lancer-2WayBookshelfSpeakers-1_grande.jpg?v=1624398300 refurbished in stock Type 2 way, 3 driver loudspeaker system Power Handling 30W Crossover Frequency 2500Hz Impedance Bass Radiator 1 x PR10 Bass 1 x LE10A Tweeter 1 x LE20-1 Dimensions 14" x 23.5" x 12" Weight 48.5lbs.
  • Full funciton test on all drivers (6).
  • Crossover fully tested.
  • All out-of-spec caps replaced.
  • Refinished cabinets.
US LTL Freight 249 Vintage Electronics > Audio > Audio Components > Speakers
6785481474216 1,699.00 USD Kenwood Eleven G // Monster Receiver Kenwood KW11G This is a gorgeous Kenwood monster receiver boasting 120 watts per channel of power to control almost any speaker you pair with it. The "G" stands for Graphic equalizer, which it happens to have (7 band) over the straight Model Eleven. It's big. It's bad. And it's absolutely beautiful sounding. Production 1975-78 Condition 9/10 Serial No. 910057 Restoration Full service check Cleaned controls and switches Replaced output transistors in the driver board Replaced Lamps Repaired FM circuit Replaced 12 capacitors Detailed Specs Tuning range FM, AM Power output 120 watts per channel into 8Ω (stereo) Frequency response 5Hz to 100kHz Total harmonic distortion 0.03% Damping factor 60 Input sensitivity 1.5mV (mic), 2.5mV (MM), 150mV (line) Signal to noise ratio 70dB (mic), 80dB (MM), 110dB (line) Output 150mV (line), 120mV (DIN), 1V (Pre out) Speaker load impedance 4Ω to 16Ω Dimensions 25"w x 8.25"h x 18.25"d Weight 45lbs. https://auralfetish.com/products/kenwood-eleven-g-11g-vintage-stereo-receiver https://cdn.shopify.com/s/files/1/0478/4884/9576/products/KenwoodElevenG-MonsterReceiver-1_grande.jpg?v=1622756403 refurbished in stock Tuning range FM, AM Power output 120 watts per channel into 8Ω (stereo) Frequency response 5Hz to 100kHz Total harmonic distortion 0.03% Damping factor 60 Input sensitivity 1.5mV (mic), 2.5mV (MM), 150mV (line) Signal to noise ratio 70dB (mic), 80dB (MM), 110dB (line) Output 150mV (line), 120mV (DIN), 1V (Pre out) Speaker load impedance 4Ω to 16Ω Dimensions 25"w x 8.25"h x 18.25"d Weight 45lbs.
  • Full service check
  • Cleaned controls and switches
  • Replaced output transistors in the driver board
  • Replaced Lamps
  • Repaired FM circuit
  • Replaced 12 capacitors
  • Detailed
US LTL Freight 241 Vintage Electronics > Audio > Audio Components > Receiver
6785497137320 1,499.00 USD Kenwood Kw-1100u // Stereo Tube Receiver Kenwood KW1100U This is one of the earliest Kenwood receivers that were made. We've painstakingly restored this piece to its original glory. It's got the looks. It's got plenty of power. And, it's a survivor from the 60's. What's not to love? Production 1965-66 Condition 8/10 Serial No. 340132 Restoration Full service check Cleaned controls and switches Replaced filter capacitors in power supply Replaced eight bypass capacitors Replaced six mylar capacitors Repaired AM circuit Repaired FM-MPX circuit All tubes test good Detailed Specs Tuning range FM, AM Power output 37 watts per channel into 8Ω (stereo) Frequency response 20Hz to 20kHz Total harmonic distortion 1% Speaker load impedance 8Ω to 16Ω Dimensions 18"W x 15.5"D x 6"H Weight 42lbs. Documentation Kenwood KW-1000u Owner's Manual https://auralfetish.com/products/kenwood-kw-1100-u-1100u-stereo-tube-receiver https://cdn.shopify.com/s/files/1/0478/4884/9576/products/Kenwood1100u-TubeReceiver-1_grande.jpg?v=1622755428 refurbished in stock Tuning range FM, AM Power output 37 watts per channel into 8Ω (stereo) Frequency response 20Hz to 20kHz Total harmonic distortion 1% Speaker load impedance 8Ω to 16Ω Dimensions 18"W x 15.5"D x 6"H Weight 42lbs.
  • Full service check
  • Cleaned controls and switches
  • Replaced filter capacitors in power supply
  • Replaced eight bypass capacitors
  • Replaced six mylar capacitors
  • Repaired AM circuit
  • Repaired FM-MPX circuit
  • All tubes test good
  • Detailed
US LTL Freight 241 Vintage Electronics > Audio > Audio Components > Receiver
6771088654504 2,899.00 USD Klipsch Heresy // Speakers / Macassar Ebony / Custom Restoration Klipsch HERESY This is an absolutely stunning pair of horn loaded loudspeakers. Expertly clad in macassar ebony with custom magnetic standoff grilles, the Klipsch Heresy has never looked so good. With such faithful signal reproduction, it's easy to understand why the Heresy remains legendary amongst audiophiles. This pair reaches well beyond functional, taking up residence in the realm of art. Your guests will want a pair, but you'll have to let them down gently – there simply is no other set like these. Production 1983 Condition 10/10 Serial No. 158Y519 / 158Y538 Restoration Crossovers recapped Mid Diaphragm upgraded to Crites titanium New silver plated banana terminal cups installed Original grill recess shaved Veneered in macassar ebony (All sides including back and bottom) Custom magnetic standoff stereo-matched grilles (Magnets installed behind the veneer Grilles clothed in black/silver Accoustone fabric Original Klipsch serial tags scanned and relocated to the interior of the cabinet Specs Frequency Response 50-17,000Hz Sound Pressure Level 96dB @ 1 Watt Impedance 8Ω nominal Woofer Klipsch K-22 Midrange Klipsch K-55-V mounted to K-700 horn Tweeter Klipsch K-77 tweeter Network Type E-700/6000Hz Dimensions 21.5"H x 15.5"W x 13"D Weight 55lbs Liner Notes The history of the Klipsch Heresy is rich. It was originally introduced in ’57 as a center channel speaker to go between two Klipschorns in larger rooms. When Paul Klipsch came up with the idea and the design, people told him he couldn’t do it, that it was acoustic heresy. “The hell I can’t,” he said, “and that’s exactly what I’m going to call it.” The resulting Heresy was a 3-way, acoustic suspension (sealed) design with a horn tweeter, horn midrange, and a 12” accordion surround woofer. The design has remained largely intact ever since, which has been wonderful to see. https://auralfetish.com/products/klipsch-heresy-speakers-in-macassar-ebony https://cdn.shopify.com/s/files/1/0478/4884/9576/products/KlipschHeresy-CustomSpeakerRestoration-1_grande.jpg?v=1623192281 refurbished in stock Frequency Response 50-17,000HzSound Pressure Level 96dB @ 1 WattImpedance 8Ω nominalWoofer Klipsch K-22Midrange Klipsch K-55-V mounted to K-700 hornTweeter Klipsch K-77 tweeterNetwork Type E-700/6000HzDimensions 21.5"H x 15.5"W x 13"DWeight 55lbs
  • Crossovers recapped
  • Mid Diaphragm upgraded to Crites titanium
  • New silver plated banana terminal cups installed
  • Original grill recess shaved
  • Veneered in macassar ebony (All sides including back and bottom)
  • Custom magnetic standoff stereo-matched grilles (Magnets installed behind the veneer
  • Grilles clothed in black/silver Accoustone fabric
  • Original Klipsch serial tags scanned and relocated to the interior of the cabinet
US LTL Freight 249 Vintage Electronics > Audio > Audio Components > Speakers
6785712947368 1,899.00 USD Luxman 309 // Vintage Integrated Amplifier Luxman LX-309 This is one of those pieces that's hard not love. Beautiful lines, luscious sound, and stunning rosewood cabinet. The whole package. Production 1973 Condition 9/10 Restoration Full service check. Cleaned controls, switches, and chassis. Tests at more than 80wpc with les than .1% distortion in both channels. Specs Power output 75 watts per channel into 8Ω (stereo) Frequency response 10Hz to 50kHz Total harmonic distortion 0.03% Damping factor 40 Input sensitivity 2.5mV (MM), 100mV (line) Signal to noise ratio 65dB (MM), 80dB (line) Dimensions 485 x 300 x 165mm Weight 12.5kg Company History LUXMAN started its business in 1925, the year when radio broadcasting started in Japan. The company called Kinsuido, a picture frame company in Osaka, made a radio department, which later became LUX. Kinsuido was the first company to display and sell radio receiving equipment at the stores. A lot of people stopped to [ Read More ] https://auralfetish.com/products/luxman-309-vintage-integrated-amplifier https://cdn.shopify.com/s/files/1/0478/4884/9576/products/Luxman-309-IntegratedAmp-Frontleft_cf328b22-f9fe-4c28-89dc-91a33eba9283_grande.jpg?v=1622670179 refurbished in stock Power output 75 watts per channel into 8Ω (stereo) Frequency response 10Hz to 50kHz Total harmonic distortion 0.03% Damping factor 40 Input sensitivity 2.5mV (MM), 100mV (line) Signal to noise ratio 65dB (MM), 80dB (line) Dimensions 485 x 300 x 165mm Weight 12.5kg
  • Full service check.
  • Cleaned controls, switches, and chassis.

Tests at more than 80wpc with les than .1% distortion in both channels.

US LTL Freight 5381 Vintage Electronics > Audio > Audio Components > Amplifier
6750095671464 1,299.00 USD Marantz 2238b // Stereo Receiver Marantz MAR2238 With it's extended tuner face, the 2238b is one of the best looking Marantz receivers out there. Great look. solid power, beautiful Marantz sound. Production 1977-79 Condition 9/10 Serial No. 87U191097 Orig. MSRP $370 Restoration Full service check Cleaned controls and switches Detailed Specs Amplifier Power output (RMS) 2 X 38w/8 ohms Frequency response 10Hz/60kHz Output Impedance 8 ohms Damping factor 45 Total Harmonic output 0,08%/8 ohms Input Sensitivity Phono 1.8 mV Input Sensitivity Tuner 180 mV Input Sensitivity Aux 180 mV Input Sensitivity Tape In 180 mV Signal to Noise Ratio Phono 76 dB Signal to Noise Ratio Tuner 90 dB Signal to Noise Ratio/Tape In 90 dB Signal to Noise Ratio Aux 90 dB Dimensions 440 x 137 x 362mm Weight 12.5 Kg (27.5lbs)   Tuner Tuning range FM 88 to 108 Mhz Sensitivity IHF 1.9 µV Selectivity &gt; 70 dB Stereo Separation &gt; 45 dB - 1Khz Tuning range AM 535 to 1605 Khz Documentation Marantz 2238b Owner's Manual https://auralfetish.com/products/marantz-2238-stereo-receiver https://cdn.shopify.com/s/files/1/0478/4884/9576/products/Marantz2238-StereoReceiver-1-Frontleft_grande.jpg?v=1621524025 refurbished in stock TypeAmplifier Power output (RMS) 2 X 38w/8 ohms Frequency response 10Hz/60kHz Output Impedance 8 ohms Damping factor 45 Total Harmonic output 0,08%/8 ohms Input Sensitivity Phono 1.8 mV Input Sensitivity Tuner 180 mV Input Sensitivity Aux 180 mV Input Sensitivity Tape In 180 mV Signal to Noise Ratio Phono 76 dB Signal to Noise Ratio Tuner 90 dB Signal to Noise Ratio/Tape In 90 dB Signal to Noise Ratio Aux 90 dB Dimensions 440 x 137 x 362mm Weight 12.5 Kg (27.5lbs) TypeTuner Tuning range FM 88 to 108 Mhz Sensitivity IHF 1.9 µV Selectivity > 70 dB Stereo Separation > 45 dB - 1Khz Tuning range AM 535 to 1605 Khz
  • Full service check
  • Cleaned controls and switches
  • Detailed
US LTL Freight 241 Vintage Electronics > Audio > Audio Components > Receiver
6625169801384 1,499.00 USD Marantz 3300 // Solid State Stereo Preamplifier Marantz 3300 Wicked nice Marantz preamp. We've been running it with an MC240 pushing a pair of Lascala's in our main system for a week or so. Love it. PRODUCTION 1973 CONDITION 9/10 SERIAL NO. 10179 ORIG. MSRP $449.95 RESTORATION Full service check Cleaned controls and switches Custom wood cabinet Detail SPECS Frequency response6Hz to 80kHz Total harmonic distortion0.02% Gain20.8dB (line) Channel separation40dB (line) Output3V (Pre out) Dimensions15-3/8 x 5-3/4 x 10-1/2 inches Weight14lbs https://auralfetish.com/products/marantz-3300-solid-state-stereo-preamplifier https://cdn.shopify.com/s/files/1/0478/4884/9576/products/Marantz-3300-Preamp-FrontLeft_grande.jpg?v=1617232812 refurbished in stock Frequency response 6Hz to 80kHz Total harmonic distortion 0.02% Gain 20.8dB (line) Channel separation 40dB (line) Output 3V (Pre out) Dimensions 15-3/8 x 5-3/4 x 10-1/2 inches Weight 14lbs
  • Full service check
  • Cleaned controls and switches
  • Custom wood cabinet
  • Detail
US LTL Freight 224 Vintage Electronics > Audio > Audio Components > Preamp
6905330958504 699.00 USD Marantz Model 1060 // Integrated Amplifier Marantz 1060 There's just something about brushed steel. Does it to me every time. Production 1971-77 Condition 9/10 Orig. MSRP $180 Restoration Full service check. Cleaned controls, switches, and chassis. This amplifier has more than 30wpc with .06% distortion in both channels. Specs Power output 30 watts per channel into 8Ω (stereo) Frequency response 20Hz to 20kHz Total harmonic distortion 0.5% Damping factor 45 Input sensitivity 1.8mV (MM) Dimensions 14-11/64 x 4-23/32 x 11-1/32 inches Weight 18lbs https://auralfetish.com/products/marantz-model-1060-integrated-amplifier-1 https://cdn.shopify.com/s/files/1/0478/4884/9576/products/Marantz1060-IntegratedAmplifier-1_grande.jpg?v=1626386045 refurbished in stock Power output 30 watts per channel into 8Ω (stereo) Frequency response 20Hz to 20kHz Total harmonic distortion 0.5% Damping factor 45 Input sensitivity 1.8mV (MM) Dimensions 14-11/64 x 4-23/32 x 11-1/32 inches Weight 18lbs
  • Full service check.
  • Cleaned controls, switches, and chassis.

This amplifier has more than 30wpc with .06% distortion in both channels.

US LTL Freight 5381 Vintage Electronics > Audio > Audio Components > Amplifier
6905358483624 899.00 USD Marantz Model 1060 // Integrated Amplifier / Original Box Marantz 1060 There's just something about brushed steel wrapped in walnut. Does it to me every time. Production 1971-77 Condition 9/10 Orig. MSRP $180 Restoration Full service check. Cleaned controls, switches, and chassis. This amplifier has more than 30wpc with .06% distortion in both channels. Specs Power output 30 watts per channel into 8Ω (stereo) Frequency response 20Hz to 20kHz Total harmonic distortion 0.5% Damping factor 45 Input sensitivity 1.8mV (MM) Dimensions 14-11/64 x 4-23/32 x 11-1/32 inches Weight 18lbs https://auralfetish.com/products/marantz-model-1060-integrated-amplifier-2 https://cdn.shopify.com/s/files/1/0478/4884/9576/products/Marantz1060-2-IntegratedAmplifier-1_grande.jpg?v=1626385930 refurbished in stock Power output 30 watts per channel into 8Ω (stereo) Frequency response 20Hz to 20kHz Total harmonic distortion 0.5% Damping factor 45 Input sensitivity 1.8mV (MM) Dimensions 14-11/64 x 4-23/32 x 11-1/32 inches Weight 18lbs
  • Full service check.
  • Cleaned controls, switches, and chassis.

This amplifier has more than 30wpc with .06% distortion in both channels.

US LTL Freight 5381 Vintage Electronics > Audio > Audio Components > Amplifier
6836579369128 1,699.00 USD Mcintosh Mac1700 // Stereo Tube Receiver McIntosh MAC1700-2 Just plug in your turntable, hook up your speakers, and notify the neighbors.This is one of the very best vintage receivers you can get you hands on, and it's also one of the most sought after. For good reason – vintage looks, spectacular sound, and flawless function. Did we mention it's a McIntosh? Production 1967 Condition 7/10 Orig. MSRP $499 Restoration Full service check. Cleaned controls, switches, and chassis. Replaced 6DS4 tubes with 6CW4, which are better suited to FM tuning. Upgraded all incandescent bulbs to LED. Aligned FM/MPX. Specs Tuning range FM Power output 40 watts per channel into 8Ω (stereo) Frequency response 20Hz to 20kHz Total harmonic distortion 0.25% Damping factor 100 Input sensitivity 2.4mV (MM), 300mV (line) Signal to noise ratio 76dB (MM), 75dB (line) Speaker load impedance 4Ω to 8Ω Dimensions 16 x 5.5 x 14.5 inches Weight 34lbs The History of McIntosh Founded in 1949, McIntosh is known for offering distinguished home audio systems that deliver the ultimate experience in music and film. Offering products for two-channel stereo sound systems and multi-channel home theaters with surround sound, McIntosh continues to define the ultimate home audio entertainment [ Read More ] https://auralfetish.com/products/mcintosh-mac1700-stereo-tube-receiver-mac-1700 https://cdn.shopify.com/s/files/1/0478/4884/9576/products/McIntosh-MAC1700-Receiver-1_grande.jpg?v=1623966611 refurbished in stock Tuning range FM Power output 40 watts per channel into 8Ω (stereo) Frequency response 20Hz to 20kHz Total harmonic distortion 0.25% Damping factor 100 Input sensitivity 2.4mV (MM), 300mV (line) Signal to noise ratio 76dB (MM), 75dB (line) Speaker load impedance 4Ω to 8Ω Dimensions 16 x 5.5 x 14.5 inches Weight 34lbs
  • Full service check.
  • Cleaned controls, switches, and chassis.
  • Replaced 6DS4 tubes with 6CW4, which are better suited to FM tuning.
  • Upgraded all incandescent bulbs to LED.
  • Aligned FM/MPX.
US LTL Freight 241 Vintage Electronics > Audio > Audio Components > Receiver
6900803207336 4,599.00 USD Mcintosh Mc-2300 // Integrated Amplifier McIntosh M-MC-2300 The epic 300wpc 128lb McIntosh MC2300 was first made famous as the amp that powered the Grateful Dead's Wall of sound. 48 of them actually. This happens to be an especially exceptional example. The tech that worked on this piece has been working on Mac for over 45 years and has had many tens of these come across his bench. His words: "This is [electronically] the nicest 2300 I've ever worked on". Cosmetically, the face has some blemishes. There's a small spot near the right handle that looks like someone used a solvent to clean it and it went through the clear coat. There's also a bit or lighter discoloration in the clear coat across the face that's visible at certain angles. From listening distance, it's magnificent though. It is currently being enjoyed in one of our personal systems biamping a pair of B&amp;W Matrix 800's (look those up!) alongside an original MC275 and C22 - and oh man does that combination sound sweet.This beast of an amp will ship via freight only. It will be securely palletized, padded, and protected for the journey. ($600 value) Production 1973 Condition Electronic 10/10Cosmetic 7/10 Serial No. 1Y418 Orig. MSRP $1799 Restoration Full service check Cleaned controls, switches, and chassis Rebuilt high voltage filter capacitor can Replaced filter capacitors This amplifier is in EXCELLENT electronic condition .08% distortion at full power Specs Power output 300 watts per channel into 8Ω (stereo), 600 watts into 8Ω (mono) Frequency response 20Hz to 20kHz Total harmonic distortion 0.25% Damping factor 14 Input sensitivity 0.5V Signal to noise ratio 90dB Speaker load impedance 0.5Ω to 16Ω Semiconductors 46 x transistors, 22 x diodes Dimensions 483 x 267 x 430mm Weight 58kg Finish anodized gold and black with black enamel chassis Documentation McIntosh MC2300 Owner's Manual https://auralfetish.com/products/mcintosh-mc-2300-integrated-amplifier https://cdn.shopify.com/s/files/1/0478/4884/9576/products/McIntoshMC2300-StereoAmplifier-1_grande.jpg?v=1626296209 refurbished in stock Power output 300 watts per channel into 8Ω (stereo), 600 watts into 8Ω (mono) Frequency response 20Hz to 20kHz Total harmonic distortion 0.25% Damping factor 14 Input sensitivity 0.5V Signal to noise ratio 90dB Speaker load impedance 0.5Ω to 16Ω Semiconductors 46 x transistors, 22 x diodes Dimensions 483 x 267 x 430mm Weight 58kg Finish anodized gold and black with black enamel chassis
  • Full service check
  • Cleaned controls, switches, and chassis
  • Rebuilt high voltage filter capacitor can
  • Replaced filter capacitors
  • This amplifier is in EXCELLENT electronic condition
  • .08% distortion at full power
US LTL Freight 5381 Vintage Electronics > Audio > Audio Components > Amplifier
6672125591720 1,250.00 USD Mcintosh Mr55 A // Am/fm Stereo Tube Tuner / Custom Restoration McIntosh MR55A The MR55 came with a dull, textured gold anodize face that always felt overly dated to us. So, we decided to see what would happen if we buffed and polished it out. All we can say is that the results speak for themselves. We've got over 30 hrs into this custom restoration. All of the tubes have been tested (strong of course), the FM has been aligned, the face has been buffed, polished &amp; painted, and the cabinet has been sanded down and beautifully refinished with a pre-catalyzed satin lacquer to give it a gorgeous, durable finish. This is by far the best looking MR55 we've ever seen. Production 1959-62 Condition Cosmetic 9.5/10 Electronic 10/10 Serial No. 3K555 Orig. MSRP $276 Restoration Full service check Cleaned controls, switches, and chassis Complete FM alignment for optimal performance Face polished to a mirror finish Re-painted black on face Re-painted raised lettering Cabinet sanded and spray finished with pre-catalyzed satin lacquer Specs Type Mono/Stereo Tuner Tuning Bands AM, FM Tuning Scale Analogue Sensitivity 3uV (FM), 15uV (AM) Distortion 3% (FM) Frequency response 20Hz to 20kHz (FM), 20Hz to 9.5kHz (AM) Dimensions 4.75" x 14.75" x 12" Weight 17lbs Tube Complement 6BZ7 (x2), 6AB4, 6BJ6 (x2), 6AU6 (x3), 6AL5 (x4), 6BN6, 6BV8, 6BA6, 6BE6, 12AU7 (x2) Liner Notes Front Panel: Anodized gold and black aluminum panel. Illuminated dial. FM light. AM light. Tuning indicator: - to +. Signal strength indicator: 0 to 5. MC light. KC light. Tuning control. AFC control: min to max. AM sensitivity switch: greatest, intermediate or minimum. Volume control with on-off switch. Selector switch: FM listen, FM tune, AM broad, AM medium, AM sharp or phono.Back Panel: Screw terminals to tv set, FM 300 ohm antenna and AM antenna: hi, lo and ground. Power cord. Fuse. Switched AC outlet. Panel lamps switch: high or low. AM antenna switch: loop or ant. Phono input. 2 audio outputs. Multiplex output. https://auralfetish.com/products/mcintosh-mr55-a-tube-tuner https://cdn.shopify.com/s/files/1/0478/4884/9576/products/McIntosh-MR55-TubeTuner-FrontLeft_grande.jpg?v=1618846075 refurbished in stock Type Mono/Stereo Tuner Tuning Bands AM, FM Tuning Scale Analogue Sensitivity 3uV (FM), 15uV (AM) Distortion 3% (FM) Frequency response 20Hz to 20kHz (FM), 20Hz to 9.5kHz (AM) Dimensions 4.75" x 14.75" x 12" Weight 17lbs Tube Complement 6BZ7 (x2), 6AB4, 6BJ6 (x2), 6AU6 (x3), 6AL5 (x4), 6BN6, 6BV8, 6BA6, 6BE6, 12AU7 (x2)
  • Full service check
  • Cleaned controls, switches, and chassis
  • Complete FM alignment for optimal performance
  • Face polished to a mirror finish
  • Re-painted black on face
  • Re-painted raised lettering
  • Cabinet sanded and spray finished with pre-catalyzed satin lacquer
US LTL Freight 6886 Vintage Electronics > Audio > Audio Components > Tuner
6792949792936 1,699.00 USD Metzner Starlight 671 // Transcription Turntable / Custom Walnut Plinth Metzner STARLIGHT671 I'm not sure what we really need to say about this turntable. It's drop dead gorgeous. **New and retipped vintage cartridge upgrade options available. Production 1956 Condition 9/10 Serial No. 1276 Orig. MSRP $79.50 Restoration Full service check Cleaned controls, switches, and chassis Custom walnut veneered plinth  Plinth spray finished with precatalyzed lacquer Leveling isolation feet added Specs Fully shielded 4-pole motor Direct center-drive Precision-machined aluminum Non-slip cork pad Micrometric speed adjustment from 16-83rpm Wow and Flutter less that 0.2% RMS Noise and rumble better than 40db below average recording level Built-in stroboscope 12" Gray 212 transcription tonearm Liner Notes "As silent as the stars" https://auralfetish.com/products/metzner-starlight-direct-drive-turntable-custom-walnut-plinth-full-restoration https://cdn.shopify.com/s/files/1/0478/4884/9576/products/MetznerStarlight-Gray212Tonearm-IdlerTranscriptionTurntable-1_grande.jpg?v=1622999982 refurbished in stock Motor Fully shielded 4-pole motor Drive Direct center-drive Platter Precision-machined aluminum Platter Mat Non-slip cork pad Speed Micrometric speed adjustment from 16-83rpm Tonearm 12" Gray 212 transcription tonearm Wow and Flutter less that 0.2% RMS Noise and rumble better than 40db below average recording level Features Built-in stroboscope
  • Full service check
  • Cleaned controls, switches, and chassis
  • Custom walnut veneered plinth
  • Plinth spray finished with precatalyzed lacquer
  • Leveling isolation feet added
US LTL Freight 256 Vintage Electronics > Audio > Audio Components > Turntable
6792983478440 3,299.00 USD Michell Gyrodec // Turntable / Michell Focus Tonearm / New Ortofon Bronze Michell GYRODEC This is a spectacular acrylic plinth Michell Gyrodec turntable that has been upgraded with an incredible Michell Focus unipivot tonearm with azimuth adjustment weights. This is a serious turntable for the serious audiophile that appreciates aesthetics as much as sonic performance.The back panel and dust cover had been removed when we discovered this turntable.** New and retipped vintage cartridge upgrades available. Production 1983 Condition 9/10 Orig. MSRP $1190 Restoration Full service check Completely disassembled and cleaned top to bottom Lubricated all moving parts Tonearm rewired with litz wire New Ortofon 2M Bronze MM cartridge ($455 value) Specs Chassis Spider chassis, suspended stable subchassis Bearing Inverted oil-pumping bearing Motor High-quality standalone DC motor Drive System Belt Speeds 33 1/3 and 45 rpm. Wow &amp; Flutter 0.04%. Rumble -78 dB. Speed Accuracy ± 0.1 %. Dimensions 21"W x 7.5"H x 17"D Weight 37lbs Liner Notes The early ‘80’s saw the introduction of the GyroDec – surely one of the most iconic turntable designs of all time. Developed to be used with an A.C. synchronous motor and two drive belts, the original GyroDec featured a heavy aluminium platter fitted with a rubber mat and the signature gold platter weights mounted below. Over the next four decades, the GyroDec has continued to be the company’s bestselling and most popular product. Key to this success has been the numerous developments to bring it to the level of performance offered today. These include the now famous inverted oil-pumping bearing; an ingenious design that dramatically reduces the amount of friction and wear resulting in low noise and rumble. Being the modular design that it is, the company is still able to offer all of the upgrades to bring an original deck right up to current spec.A uni-pivot design, the Focus Tonearm has a layered-dampened arm tube and precision side weights for azimuth control. https://auralfetish.com/products/michell-gyrodec-turntable-ortofon-bronze https://cdn.shopify.com/s/files/1/0478/4884/9576/products/MichellGyrodec-FocusTonearm-Turntable-1_grande.jpg?v=1623000212 refurbished in stock Chassis Spider chassis, suspended stable subchassis Bearing Inverted oil-pumping bearing Motor High-quality standalone DC motor Drive System Belt Speeds 33 1/3 and 45 rpm. Wow & Flutter 0.04%. Rumble -78 dB. Speed Accuracy ± 0.1 %. Dimensions 21"W x 7.5"H x 17"D Weight 37lbs
  • Full service check
  • Completely disassembled and cleaned top to bottom
  • Lubricated all moving parts
  • Tonearm rewired with litz wire
  • New Ortofon 2M Bronze MM cartridge ($455 value)
US LTL Freight 256 Vintage Electronics > Audio > Audio Components > Turntable
6634711417000 1,300.00 USD Pilot / Pilotone Aa-902 // Monoblock Stereo Pair Tube Amplifiers Pilot AA902 This is an exceptional pair of fully restored rare Pilot tube amps. One shows a bit more wear cosmetically than the other, but both are sonically fantastic. Production 1953 Condition Cosmetic 7/10 Electronic 10/10 Orig. MSRP $47 (each) Restoration Full service check Full recap on both amps New 6V6 tubes / matched quad 1 New 5Y3 rectifier tube Replaced both power cords Detailed Specs Power Output 10w each Model Pilotone AA-902 - Pilot Radio Corporation - Brooklyn, NY Type High Fidelity Mono Power Amplifiers Speaker Output Impedances 4, 8 and 16 Ohms Weight (each) 13 lb (13 lb 0 oz) / 5.902 kg Dimensions (each) (WHD) 14.5 x 5.25 x 4.5 inch / 368 x 133 x 114 mm https://auralfetish.com/products/pilot-pilotone-aa-902-monoblock-stereo-pair-tube-amplifiers https://cdn.shopify.com/s/files/1/0478/4884/9576/products/Pilot-PilotoneAA-902-MonoblockTubeAmplifiers-1_grande.jpg?v=1623000747 refurbished in stock Power Output 10w each Model Pilotone AA-902 - Pilot Radio Corporation - Brooklyn, NY Type High Fidelity Mono Power Amplifiers Speaker Output Impedances 4, 8 and 16 Ohms Weight (each) 13 lb (13 lb 0 oz) / 5.902 kg Dimensions (each) (WHD) 14.5 x 5.25 x 4.5 inch / 368 x 133 x 114 mm
  • Full service check
  • Full recap on both amps
  • New 6V6 tubes / matched quad
  • 1 New 5Y3 rectifier tube
  • Replaced both power cords
  • Detailed
US LTL Freight 5381 Vintage Electronics > Audio > Audio Components > Amplifier
6900802715816 1,299.00 USD Pioneer Sm-b200a // Tube Receiver Pioneer P-SMB-200A One look at this spectacular piece of history, with it's 50's automotive styling, and we were hooked. It's the oldest piece of Pioneer gear we've ever seen. The research we've done suggest it might be the very first receiver that Pioneer ever made. Truly a collectors piece! Production 1960-64 Condition 9/10 Serial No. 2019 Restoration Full service check Cleaned controls, switches, and chassis Replaced coupling capacitors Magnetic phono gain is very low (recommend using an external phono stage) Repainted Black chassis cover Less than 1% distortion Detailed Specs Output 15wpc Tuning Range AM, FM Tube Complement 2x 6AQ8, 4x 6BA6, 1x 6G-E12, 1x 12AX7, 2x 6BE6, 4x 6BM8, 1x 5AR4 (15) Dimensions 16.1w x 5.5h x 12.6d inch Weight 26 lbs https://auralfetish.com/products/pioneer-sm-b200a-tube-receiver https://cdn.shopify.com/s/files/1/0478/4884/9576/products/PioneerSMB-200A-TubeReceiver-1_grande.jpg?v=1626203442 refurbished in stock Output 15wpc Tuning Range AM, FM Tube Complement 2x 6AQ8, 4x 6BA6, 1x 6G-E12, 1x 12AX7, 2x 6BE6, 4x 6BM8, 1x 5AR4 (15) Dimensions 16.1w x 5.5h x 12.6d inch Weight 26 lbs
  • Full service check
  • Cleaned controls, switches, and chassis
  • Replaced coupling capacitors
  • Magnetic phono gain is very low (recommend using an external phono stage)
  • Repainted Black chassis cover
  • Less than 1% distortion
  • Detailed
US LTL Freight 241 Vintage Electronics > Audio > Audio Components > Receiver
6750106091688 2,499.00 USD Pioneer Sx 1080 // Stereo Receiver Pioneer SX1080 This SX-1080 is absolutely stunning. The face is immaculate, the wood doesn't have a scratch or a nick in it, and it sounds exactly as good as a big steel faced Pioneer should. Production 1978 Condition 9/10 Serial No. YD3609300S Orig. MSRP $700 Restoration Full service check Cleaned controls and switches Aligned AM/FM MPX tuning circuits Adjusted DC Balance and Idle current Cleaned Speaker relay Replaced 5 caps, 2 transistors, 2 diodes Detailed Specs Tuning range/span&gt; FM, MW Power output/span&gt; 120 watts per channel into 8Ω (stereo) Frequency response/span&gt; 5Hz to 80kHz Total harmonic distortion/span&gt; 0.05% Damping factor/span&gt; 30 Input sensitivity/span&gt; 7.5mV (mic), 2.5mV (MM), 150mV (line) Signal to noise ratio/span&gt; 76dB (MM), 90dB (line) Output/span&gt; 150mV (line), 1V (Pre out) Semiconductors/span&gt; 5 x FET, 8 x IC, 36 x transistors, 42 x diodes Dimensions/span&gt; 526 x 176 x 440mm Weight/span&gt; 47lbs (21.3kg) Documentation Pioneer SX 1080 Owner's Manual https://auralfetish.com/products/pioneer-sx-1080-stereo-receiver https://cdn.shopify.com/s/files/1/0478/4884/9576/products/PioneerSX1080-StereoReceiver-1-FrontLeft2_grande.jpg?v=1621609277 refurbished in stock Tuning range FM, MW Power output 120 watts per channel into 8Ω (stereo) Frequency response 5Hz to 80kHz Total harmonic distortion 0.05% Damping factor 30 Input sensitivity 7.5mV (mic), 2.5mV (MM), 150mV (line) Signal to noise ratio 76dB (MM), 90dB (line) Output 150mV (line), 1V (Pre out) Semiconductors 5 x FET, 8 x IC, 36 x transistors, 42 x diodes Dimensions 526 x 176 x 440mm Weight 47lbs (21.3kg)
  • Full service check
  • Cleaned controls and switches
  • Aligned AM/FM MPX tuning circuits
  • Adjusted DC Balance and Idle current
  • Cleaned Speaker relay
  • Replaced 5 caps, 2 transistors, 2 diodes
  • Detailed
US LTL Freight 241 Vintage Electronics > Audio > Audio Components > Receiver
6905258639528 3,350.00 USD Pioneer Sx-1250 // Solid-state Receiver Pioneer P-SX-1250 Another 160wpc Pioneer monster! It's hard not to love Pioneer steel faced big power receivers. It's got a little bit of the typical scratching on the face and the top of the bezel, but nothing too dramatic or visible from listening distance. This gorgeous piece of gear widely considered to be the absolute best of the era. Production 1976-78 Condition 8/10 Serial No. WF5610607M Orig. MSRP $900 Restoration Full service check Cleaned controls, switches, and chassis Aligned FM Restored cabinet Detailed Specs Tuning range FM, MW Power output 160 watts per channel into 8Ω (stereo) Frequency response 10Hz to 50kHz Total harmonic distortion 0.1% Damping factor 30 Input sensitivity 6.5mV (mic), 2.5mV (MM), 150mV (DIN), 150mV (line) Signal to noise ratio 75dB (MM), 90dB (line) Output 150mV (line), 30mV (DIN), 1V (Pre out) Speaker load impedance 4Ω (minimum) Dimensions 556 x 186.5 x 464.5mm Weight 65lbs Documentation Pioneer SX-1250 Owner's Manual https://auralfetish.com/products/pioneer-sx-1250-solid-state-receiver-original-cabinet https://cdn.shopify.com/s/files/1/0478/4884/9576/products/PioneerSX1250-1-StereoReceiver-1_grande.jpg?v=1626372743 refurbished in stock Tuning range FM, MW Power output 160 watts per channel into 8Ω (stereo) Frequency response 10Hz to 50kHz Total harmonic distortion 0.1% Damping factor 30 Input sensitivity 6.5mV (mic), 2.5mV (MM), 150mV (DIN), 150mV (line) Signal to noise ratio 75dB (MM), 90dB (line) Output 150mV (line), 30mV (DIN), 1V (Pre out) Speaker load impedance 4Ω (minimum) Dimensions 556 x 186.5 x 464.5mm Weight 65lbs
  • Full service check
  • Cleaned controls, switches, and chassis
  • Aligned FM
  • Restored cabinet
  • Detailed
US LTL Freight 241 Vintage Electronics > Audio > Audio Components > Receiver
6900838760616 3,450.00 USD Pioneer Sx-1250 // Solid-state Receiver / Custom Cabinet Pioneer P-SX-1250 This 160wpc monster is an absolute beauty in it's new solid walnut custom cabinet. It's hard not to love Pioneer steel faced big power receivers. It's got a little bit of the typical light scratching on the face and the top of the bezel, but nothing too dramatic or visible from listening distance. This gorgeous piece of gear widely considered to be the absolute best of the era. Production 1976-78 Condition 9/10 Serial No. WF36105295M Orig. MSRP $900 Restoration Full service check Cleaned controls, switches, and chassis .002% distortion in both channels Custom solid walnut cabinet Detailed Specs Tuning range FM, MW Power output 160 watts per channel into 8Ω (stereo) Frequency response 10Hz to 50kHz Total harmonic distortion 0.1% Damping factor 30 Input sensitivity 6.5mV (mic), 2.5mV (MM), 150mV (DIN), 150mV (line) Signal to noise ratio 75dB (MM), 90dB (line) Output 150mV (line), 30mV (DIN), 1V (Pre out) Speaker load impedance 4Ω (minimum) Dimensions 556 x 186.5 x 464.5mm Weight 65lbs Documentation Pioneer SX-1250 Owner's Manual https://auralfetish.com/products/pioneer-sx-1250-solid-state-receiver-new-cabinet https://cdn.shopify.com/s/files/1/0478/4884/9576/products/PioneerSX1250-2-StereoReceiver-1_grande.jpg?v=1626371431 refurbished in stock Tuning range FM, MW Power output 160 watts per channel into 8Ω (stereo) Frequency response 10Hz to 50kHz Total harmonic distortion 0.1% Damping factor 30 Input sensitivity 6.5mV (mic), 2.5mV (MM), 150mV (DIN), 150mV (line) Signal to noise ratio 75dB (MM), 90dB (line) Output 150mV (line), 30mV (DIN), 1V (Pre out) Speaker load impedance 4Ω (minimum) Dimensions 556 x 186.5 x 464.5mm Weight 65lbs
  • Full service check
  • Cleaned controls, switches, and chassis
  • .002% distortion in both channels
  • Custom solid walnut cabinet
  • Detailed
US LTL Freight 241 Vintage Electronics > Audio > Audio Components > Receiver
6900830011560 1,299.00 USD Pioneer Sx-850 // Solid-state Receiver Pioneer P-SX-850 Sporting a new custom made solid walnut cabinet, this beautiful SX-850 is ready to rock! There are a few typical scratches and dings in the faceplate but nothing that is visible from listening distance. Production 1976 Condition 9/10 Serial No. WF2601642M Orig. MSRP $500 Restoration Full service check Cleaned controls, switches, and chassis Repaired am antenne Custom solid walnut cabinet Detailed Specs Tuning range FM, MW Power output 65 watts per channel into 8Ω (stereo) Frequency response 10Hz to 50kHz Total harmonic distortion 0.1% Damping factor 25 Input sensitivity 6.5mV (mic), 2.5mV (MM), 150mV (DIN), 150mV (line) Signal to noise ratio 70dB (MM), 90dB (line) Output 150mV (line), 30mV (DIN), 1V (Pre out) Speaker load impedance 4Ω (minimum) Semiconductors 3 x FET, 3 x IC, 56 x transistors, 36 x diodes Dimensions 526.6 x 173 x 411.5mm Weight 42lbs Documentation Pioneer SX 850 Owner's Manual https://auralfetish.com/products/pioneer-sx-850-solid-state-receiver https://cdn.shopify.com/s/files/1/0478/4884/9576/products/PioneerSX850-StereoReceiver-1_grande.jpg?v=1626370370 refurbished in stock Tuning range FM, MW Power output 65 watts per channel into 8Ω (stereo) Frequency response 10Hz to 50kHz Total harmonic distortion 0.1% Damping factor 25 Input sensitivity 6.5mV (mic), 2.5mV (MM), 150mV (DIN), 150mV (line) Signal to noise ratio 70dB (MM), 90dB (line) Output 150mV (line), 30mV (DIN), 1V (Pre out) Speaker load impedance 4Ω (minimum) Semiconductors 3 x FET, 3 x IC, 56 x transistors, 36 x diodes Dimensions 526.6 x 173 x 411.5mm Weight 42lbs
  • Full service check
  • Cleaned controls, switches, and chassis
  • Repaired am antenne
  • Custom solid walnut cabinet
  • Detailed
US LTL Freight 241 Vintage Electronics > Audio > Audio Components > Receiver
6723279028392 2,699.00 USD Thorens Td-135 // Vintage Turntable / Custom Palisander Plinth / Shure V15 Thorens TD135 Quite possibly the most stunning TD 135 you'll ever see. But as rare as they are, it may be the only one you'll ever hear. The custom-made Palisander wood plinth takes this table to another level, and it's certain to become the centerpiece of your collection. The Swiss made TD 135 boasts the same motor and Idler wheel/belt system as the TD 124 and comes equipped with the venerable Shure V15 cartridge, as well as upgraded suspension bushings. Production 1961-68 Condition 9/10 Serial No. #3444 Orig. MSRP £37.41 Restoration Full service check. Cleaned controls and switches. Custom 3D-printed tonearm rest Custom-made plinth, clad in santos palisander wood Specs Platter 12″, non-magnetic Tonearm BTD-12S professional Speed control +-3% variable via eddy-current braking system Speeds 16, 33, 45 and 78rpm Drive method idler wheel and belt drive for double motor isolation Rumble, wow and flutter exceeds NAB specifications Dimensions 15 x 12″ Weight 22.7lbs https://auralfetish.com/products/thorens-td-135-vintage-turntable-with-custom-plinth https://cdn.shopify.com/s/files/1/0478/4884/9576/products/thorens-td135-1-front-left_grande.jpg?v=1621381729 refurbished in stock Platter 12″, non-magnetic Tonearm BTD-12S professional Speed control +-3% variable via eddy-current braking system Speeds 16, 33, 45 and 78rpm Drive method idler wheel and belt drive for double motor isolation Rumble, wow and flutter exceeds NAB specifications Dimensions 15 x 12″ Weight 22.7lbs
  • Full service check.
  • Cleaned controls and switches.
  • Custom 3D-printed tonearm rest
  • Custom-made plinth, clad in santos palisander wood
US LTL Freight 256 Vintage Electronics > Audio > Audio Components > Turntable
6235501068456 5,800.00 USD Transcriptors Skeleton // Turntable / Adc-xlm1 Nos Cart / Vestigial Tonearm Transcriptors SKEL There’s really nothing to say about this Skeleton. One look says volumes. One listen and you’ll never be the same again. This turntable is as close to mint as I’ve seen. I’m flat out in love. I really don't want to sell it. If you have to own one I understand. Production 1973-1977 Condition 10/10 Orig. MSRP $590 Restoration Full service check. Cleaned controls and switches. Disassembled, detailed, &amp; lubed. Tonearm rewired with Cardas Litz wire. Tonearm calibrated. Specs Platter12" diameter, cast and machined, aluminum alloy with 5 silver-plated weights, approx 6.5 lb in weight Main BearingSlim section ball-ended ground and polished steel, supported on a hardened steel thrust plate. Bushing coated with PTFE a material having a lower coefficient of friction than any other solid. Motor10 Pole synchronous, split-phase, 720rpm Wow and flutter0.05% Speeds33 and 45rpm Rumblenil Dimensions18 x 15.5 x 7" Documentation https://cdn.shopify.com/s/files/1/0478/4884/9576/files/transcriptor-skeleton-manual.pdf?v=1611940680 Liner Notes Designed by David Gammon in Carlow, Ireland. The Transcriptors Skeleton employs a low-speed synchronous motor on a sprung-suspension motor board. The Skeleton's platter is driven by a rubber belt providing the best insulation against vibration and rumble. In order to eliminate any mechanical or electrical shock to the equipment, the on-off switching is accomplished by means of a magnetically actuated reed switch which assures long, trouble-free life. https://auralfetish.com/products/transcriptors-skeleton-turntable-adc-xlm1-nos-cart-vestigial-tonearm-mint https://cdn.shopify.com/s/files/1/0478/4884/9576/products/Transcriptors-Skeleton-Turntable-ClosedFrontLeft_grande.jpg?v=1611946047 refurbished in stock Platter12" diameter, cast and machined, aluminium alloy with 5 silver-plated weights, approx 6.5 lb in weight Main BearingSlim section ball-ended ground and polished steel, supported on a hardened steel thrust plate. Bushing coated with PTFE a material having a lower coefficient of friction than any other solid. Motor10 Pole synchronous, split-phase, 720rpm Wow and flutter0.05% Speeds33 and 45rpm Rumblenil Dimensions18 x 15.5 x 7"CartridgeADC-XLM1 NOS
  • Full service check.
  • Cleaned controls and switches.
  • Disassembled, detailed, & lubed.
  • Tonearm rewired with Cardas Litz wire.
  • Tonearm calibrated.
US LTL Freight 256 Vintage Electronics > Audio > Audio Components > Turntable
6793061040296 16,999.00 USD Triode Trx-m845 // Monster Single-ended Monoblock Tube Amplifiers / Orig. Boxes Triode TRX-M845 Welcome to the next level. These Triode Corporation monoblocks are absolutely mind bending. The build quality is drool worthy. Their size is staggering. And the sound? Well... let me just say that these are absolutely the best sounding tube amps we've ever heard. They're detailed, but smooth, and ohhhh so strong. This is what all other tubes amps will be judged by from here on out for us. You will NOT be dissapointed. This pair was used by Triode themselves in the Triode/Zu Audio booth as demo units at two trades shows: None other than Axpona and CES. That's it. They were then boxed back up in their original boxes and stored away. There are a few small blemishes (see photos) but otherwise absolutely perfect. Nearly $25K new, this is a chance to own a super low hour pair at a fantastic price. Condition 9.5/10 Orig. MSRP $22,500 Restoration Full service check Cleaned controls, switches, and chassis Ran for several days in our listening room Detailed Specs Circuit system 845 A class parallel single ended monaural power amplifier Tube complement 3x 845 (2x 211), 6SN7, 1x 12AU7 Output tube 2x 845 parallel single -ended Output power A class 50W at 8 ohms Frequency response 10Hz-50kHz(-2dB) S/N ratio 90dB Total harmonic distortion 0.1% Input sensitivity 0.9V Input impedance 100k ohm Input terminals RCA unbalanced*1 , XLR balanced*1(No.2 hot or No.3 hot switchable) Output terminals 4 ohms , 6 ohms , 8 ohms , 16 ohms Bias Self bias Plug type High quality banana plug capable type NFB selector 0dB , 3dB , 6dB Equipped components NEUTRIK XLR terminal (Germany) Other functions 845/211 bias selector; Bias check meter Accessories Cloth tube shroud Power consumption 280W Dimensions W580mm*D440mm*H300mm Weight 58kg Documentation TRX-M845 Owner's Manual (日本語) Liner Notes TRX-M845 pure class A 50 Watt single ended monaural power amplifier. "Tonality was slightly to the warm side of neutral, but did not step over into the "golden" hued zone. High frequencies were delicate and well differentiated, but I almost didn't notice because the whole was so well integrated and music just poured forth." https://auralfetish.com/products/triode-trx-m845-monoblock-tube-amplifier https://cdn.shopify.com/s/files/1/0478/4884/9576/products/TriodeTRX-M845-MonoblockTubeAmp-1_grande.jpg?v=1623171412 refurbished in stock Circuit system 845 A class parallel single ended monaural power amplifier Tube complement 3x 845 (2x 211), 6SN7, 1x 12AU7 Output tube 2x 845 parallel single -ended Output power A class 50W at 8 ohms Frequency response 10Hz-50kHz(-2dB) S/N ratio 90dB Total harmonic distortion 0.1% Input sensitivity 0.9V Input impedance 100k ohm Input terminals RCA unbalanced*1 , XLR balanced*1(No.2 hot or No.3 hot switchable) Output terminals 4 ohms , 6 ohms , 8 ohms , 16 ohms Bias Self bias Plug type High quality banana plug capable type NFB selector 0dB , 3dB , 6dB Equipped components NEUTRIK XLR terminal (Germany) Other functions 845/211 bias selector; Bias check meter Accessories Cloth tube shroud Power consumption 280W Dimensions W580mm*D440mm*H300mm Weight 58kg
  • Full service check
  • Cleaned controls, switches, and chassis
  • Ran for several days in our listening room
  • Detailed
US LTL Freight 5381 Vintage Electronics > Audio > Audio Components > Amplifier
6905750552744 999.00 USD V-m / Voice Of Music 816 // Custom Integrated Tube Amplifier The Voice of Music VM1465-VM1428 https://auralfetish.com/products/v-m-the-voice-of-music-816-custom-integrated-tube-amplifier https://cdn.shopify.com/s/files/1/0478/4884/9576/products/VM-VoiceofMusic816-CustomIntegratedtubeAmplifier-1_grande.jpg?v=1626387458 refurbished in stock Power Output 40wpc Total Harmonic Distortion < .35% Tube copmplement 4x 6B6, 3x 12AX7, 1x 5U4 Dimensions 15.5"w x 12"h x 14"d Weight 23.5
  • Full service check
  • Cleaned controls, switches, and chassis
US LTL Freight 251 Vintage Electronics > Audio > Audio Components > Amplifier
6788481876136 599.00 USD Xam Mark V By Harman Kardon // Tube Tuner Harman Kardon XAM5 This is a super rare tube tuner from the 60's made for E.J. Korvette's by Harman Kardon. The white face gives it a strikingly unique look. The lettering on the back of the glass is beginning to show its age but its such a hard to find piece that I don't think you'll come across one that's in nicer condition. Production 1963 Condition 8/10 Serial No. 4603942 Restoration Full service check Cleaned controls and switches Replaced all tubes Detailed https://auralfetish.com/products/xam-mark-v-by-harman-kardon-tube-tuner https://cdn.shopify.com/s/files/1/0478/4884/9576/products/XAMMarkV-ByHarmanKardon-TubeTuner-1_grande.jpg?v=1622758633 refurbished in stock Xam Mark V By Harman Kardon // Tube Tuner
  • Full service check
  • Cleaned controls and switches
  • Replaced all tubes
  • Detailed
US LTL Freight 6886 Vintage Electronics > Audio > Audio Components > Tuner